Low Cycle Fatigue Behavior of Steam Generator Tubes under Axial Loading
نویسندگان
چکیده
منابع مشابه
High Cycle Fatigue Property of Carburized 20Cr Gear Steel under Axial Loading
Abstract: The high cycle fatigue property of carburized 20Cr gear steel was experimentally investigated under axial loading with a stress ratio of zero. The test results show that this steel exhibits gradually decreasing S-N characteristics, and the fatigue strength corresponding to 109 cycles is about 455 MPa. Based on the observation of fracture surfaces, the interior inclusion fisheye-induce...
متن کاملNumerical Crashworthiness Analysis of Graded Layered Foam- Filled Tubes Under Axial Loading
In this article, the results of a study on energy absorption characteristics of foam-filled thin-walled structures with finite element analysis have been presented. Four specimens of thin walled structures have been filled with uniform foam and three specimens have been filled with linear four-layered foam. Also, eight layers HLH (High-Low-High) and eight layers LHL (Low-High-Low) have been sim...
متن کاملExperimental Study on Double-Walled Copper and Carbon/Epoxy Composite Tubes under the Axial Loading
This paper investigates axial compression process of multi-layered tubes with circular cross-section under the axial loading in the quasi-static condition using experimental method. Some specimens are prepared in seven different groups, namely; empty carbon/epoxy composite tubes, solid carbon/epoxy composite rods, empty copper tubes, composite tubes with silicon sealant filler, concentrically s...
متن کاملLow Cycle Fatigue Testing of Ball Grid Array Solder Joints under Mixed-Mode Loading Conditions
To give a proper and accurate estimation of the fatigue life of ball grid array (BGA) solder joints, a mechanical fatigue test method under mixed-mode loading is proposed. Experiments were conducted with 63Sn/37Pb and Sn/3.5Ag/0.75Cu solder joints in room temperature. The mechanical low cycle fatigue tests were performed under several loading angles. The loading angle is controlled by several g...
متن کاملLinkage between Ductile Fracture and Extremely Low Cycle Fatigue of Inconel 718 under Multiaxial Loading Conditions
Ductile fracture and extremely low cycle fatigue (ELCF) [1] are two common failure modes in aircraft engines and turbomachinery designs [2]; however, the linkage between these two failure modes under multi-axial loading conditions has never been systematically studied. Inconel 718 (IN718) is one type of high temperature alloys widely used in turbomachines. Specially designed specimens and tests...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials
سال: 2018
ISSN: 1996-1944
DOI: 10.3390/ma11101944