Low Cost Technology for Solid Recovered Fuel Production from Municipal Solid Waste

Elemental balance of SRF production process: solid recovered fuel produced from municipal solid waste.

In the production of solid recovered fuel (SRF), certain waste components have excessive influence on the quality of product. The proportion of rubber, plastic (hard) and certain textiles was found to be critical as to the elemental quality of SRF. The mass flow of rubber, plastic (hard) and textiles (to certain extent, especially synthetic textile) components from input waste stream into the o...

Thermogravimetric and kinetic analysis of the decomposition of Solid Recovered Fuel from municipal solid waste

Evaluating of Refuse Derived Fuel (RDF) Production from Municipal Solid Waste (Case Study: Qazvin Province)

Considering increasing population growth in recent decades, and consequently, the increase in waste production in the world, waste management and efforts to reduce their harm to the environment has become an important issue. One of the appropriate ways to manage municipal waste is to generate energy from waste, especially by RDF production method. On the other hand, in order to reduce the consu...

Methane Production from Municipal Solid Waste

Introduction Archaeological investigations of landfills have revealed that biodegradable wastes can be found — virtually intact — 25 years after burial. We know that landfills contain bacteria with the metabolic capability to degrade many of the materials that are common components of municipal refuse. The persistence for decades of degradable materials in the presence of such organisms appears...

Hydrothermal Treatment of Municipal Solid Waste to Produce Solid Fuel

This paper describes the application of innovative hydrothermal technology on local municipal solid waste (MSW) to produce low chlorine content solid co-firing fuel with coal. Raw MSW was treated at temperatures ranging from 210 to 235°C with 30 to 90 minutes holding period. The process yielded slump products which were then naturally dried to 5% moisture content, resulted in dry products with ...