منابع مشابه
Low‐cost flexible thin‐film detector for medical dosimetry applications
The purpose of this study is to characterize dosimetric properties of thin film photovoltaic sensors as a platform for development of prototype dose verification equipment in radiotherapy. Towards this goal, flexible thin-film sensors of dose with embedded data acquisition electronics and wireless data transmission are prototyped and tested in kV and MV photon beams. Fundamental dosimetric prop...
متن کاملThin-Film Phase Shifters for Low-Cost Phased Arrays
Drastic cost reduction of phased-arrays will require a shift in design strategy. The emphasis must be on removing expensive active components, not developing more highly integrated components or exotic packaging techniques. The phase shifter circuit—an essential active component—is the primary obstacle in decreasing the cost and number of active components in a phased-array. The problem is mult...
متن کاملNext Generation High-Efficiency Low-cost Thin Film Photovoltaics
Our goal is to develop novel growth approaches for producing low cost solar cells that have efficiency comparable to those made from high-cost, single-crystalline materials. Our efforts to date focus on using ion beam assisted deposition (IBAD) to control the grain boundary alignment in polycrystalline silicon thin films. The boundaries between highly aligned grains have smaller defect densitie...
متن کاملProcess Optimization of Deposition Conditions for Low Temperature Thin Film Insulators used in Thin Film Transistors Displays
Deposition process for thin insulator used in polysilicon gate dielectric of thin film transistors are optimized. Silane and N2O plasma are used to form SiO2 layers at temperatures below 150 ºC. The deposition conditions as well as system operating parameters such as pressure, temperature, gas flow ratios, total flow rate and plasma power are also studied and their effects are discussed. The p...
متن کاملSubmicrometer patterning of charge in thin-film electrets.
Thin-film electrets have been patterned with trapped charge with submicrometer resolution using a flexible, electrically conductive electrode. A poly(dimethylsiloxane) stamp, patterned in bas-relief and supporting an 80-nanometer-thick gold film, is brought into contact with an 80-nanometer-thick film of poly(methylmethacrylate) supported on n-doped silicon. A voltage pulse between the gold fil...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture
سال: 2006
ISSN: 0954-4054,2041-2975
DOI: 10.1243/09544054jem523