Localized Deposition Technique using an Atmospheric-pressure Microplasma Jet for On-demand Material Processing
نویسندگان
چکیده
منابع مشابه
Atmospheric microplasma jet: spectroscopic database development and analytical results.
This paper presents a developed dielectric-barrier-discharge-based "sniffer" that offers unique characteristics not available from other techniques. It is a portable, highly specific, and sensitive detector that operates at atmospheric pressure. It provides both molecular and elemental information on organic and inorganic gases and particulate aerosols. Measurements were made to electrically ch...
متن کاملCharacterization of Atmospheric Pressure Microplasma Jet Source and its Application to Bacterial Inactivation
Atmospheric pressure microplasma jet sources driven by radio-frequency wave of 13.56MHz and by low frequency continuous wave of several kHz ac were fabricated and characterized. The source consists of an ac-driven copper wire (needle) surrounded by dielectric layer that are placed in a glass tube, and a ground plane electrode (pin-to-plane electrode configuration). The basic physical and chemic...
متن کاملUsing an Atmospheric Pressure Chemical Vapor Deposition Process for the Development of V2O5 as an Electrochromic Material
Vanadium pentoxide coatings were grown by atmospheric pressure chemical vapor deposition varying the gas precursor ratio (vanadium (IV) chloride:water) and the substrate temperature. All samples were characterized by X-ray diffraction, Raman spectroscopy, scanning electron microscopy, cyclic voltammetry, and transmittance measurements. The water flow rate was found to affect the crystallinity a...
متن کاملDeposition of Antimicrobial Copper-Rich Coatings on Polymers by Atmospheric Pressure Jet Plasmas
Inanimate surfaces serve as a permanent reservoir for infectious microorganisms, which is a growing problem in areas in everyday life. Coating of surfaces with inorganic antimicrobials, such as copper, can contribute to reduce the adherence and growth of microorganisms. The use of a DC operated air plasma jet for the deposition of copper thin films on acrylonitrile butadiene styrene (ABS) subst...
متن کاملDiamond deposition by atmospheric pressure induction plasma: effects of impinging jet fluid mechanics on film formation
The effect of boundary layer thickness on diamond film formation in an atmospheric pressure plasma was investigated by adding argon to the methane-hydrogen reactant jet so as to increase the jet momentum. It was found that argon addition significantly increased the range of conditions over which well-faceted, continuous diamond film could be grown. A numerical model was developed to predict the...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Photopolymer Science and Technology
سال: 2006
ISSN: 0914-9244,1349-6336
DOI: 10.2494/photopolymer.19.235