Local Structure Stability of Cu-Al2O3 NOx Removal Catalyst

Cu/Ba/bauxite: an Inexpensive and Efficient Alternative for Pt/Ba/Al2O3 in NOx Removal

Cu/Ba/bauxite possesses superior NOx storage and reduction (NSR) performances, high thermal stability, strong resistance against SO₂ poisoning and outstanding regeneration ability in comparison with Pt/Ba/Al₂O₃. It can serve as a cheap and promising alternative for traditional Pt/Ba/Al₂O₃ in NOx removal from lean-burn engines.

Elimination of formaldehyde over Cu-Al2O3 catalyst at room temperature.

Catalytic elimination of formaldehyde (HCHO) was investigated over Cu-Al2O3 catalyst at room temperature. The results indicated that no oxidation of HCHO into CO2 occurs at room temperature, but the adsorption of HCHO occurs on the catalyst surface. With the increase of gas hourly space velocity (GHSV) and inlet HCHO concentration, the time to reach saturation was shortened proportionally. The ...

Novel Pd promoted Ag/Al2O3 catalyst for the selective reduction of NOx

A novel palladium promoted Ag/Al2O3 catalyst (denoted Ag-Pd/Al2O3) has been developed for the selective catalytic reduction of NO by C3H6. The Ag-Pd/Al2O3 shows a higher NOx conversion than Ag/Al2O3, especially at the temperatures ranging from 300 to 450 ◦C. The addition of a small amount of Pd (0.01 wt.%) to Ag/Al2O3 is considered to be favorable for the partial oxidation of C3H6. In situ diff...

NOx adsorption on Al2O3 and Ag/Al2O3 from first principles

Hydrocarbon (HC) assisted selective catalytic reduction (SCR) is an appealing technology for NOx reduction in oxygen excess. In particular, a catalyst formulation with silver supported on alumina (Ag/Al2O3) has been measured to have high activity for this reaction [1,2]. Although numerous experimental studies have clarified issues concerning the Ag/Al2O3 catalyst, the nature of the active phase...

CATALYST STRUCTURE STUDIED BY A LABORATORY EXAFS FACILITY : Ru/Al2O3