LOCAL AND DISTORTIONAL BUCKLING OF THIN WALLED BEAMS BASED ON SECOND ORDER DISPLACEMENT FIELDS
نویسندگان
چکیده
منابع مشابه
Local, Distortional, and Euler Buckling of Thin-Walled Columns
Open cross-section, thin-walled, cold-formed steel columns have at least three competing buckling modes: local, distortional, and Euler ~i.e., flexural or flexural-torsional! buckling. Closed-form prediction of the buckling stress in the local mode, including interaction of the connected elements, and the distortional mode, including consideration of the elastic and geometric stiffness at the w...
متن کاملStrength Design Curves for Thin-Walled Sections Undergoing Distortional Buckling
Certain types of cold-formed sections, notably those composed of high-strength steel, some decking sections and racking sections may undergo a mode of buckling called distortional in which edge and intermediate stiffeners are inadequate to prevent lateral movement of the flanges which they support. The existing design methods in current standards and specifications are often not adequate to acc...
متن کاملDistortional Buckling Tests on Cold-Formed Steel Beams
Failure in cold-formed steel beams is generally initiated by one of three instabilities: local, distortional, or lateral-torsional buckling. For cold-formed steel joists, purlins, or girts, when the compression flange is not restrained by attachment to sheathing or paneling, distortional buckling may be the predominant failure mode. Experimental results on cold-formed steel beams with unrestrai...
متن کاملLateral and distortional buckling ofpultruded I - beams Ever
The elastic buckling modes of pultruded I-beams subjected to various loading conditions are studied. The coupling of lateral and distortional buckling, very likely to appear in thin-walled cross-sections, is investigated. Plate theory is used to allow for distortion of the cross-section. Shear effects and bendingt\\isting coupling are accounted for in the analysis, because of their significant ...
متن کاملLocal and Distortional Buckling of Cold-Formed Steel Members
Laminar structures have a high post-buckling strength reserve. Cold-formed steel profiles can be taken as a set of thin plate elements. Therefore it is necessary to design this type of profiles taking into account that reserve of strength in post-local buckling modes of failure. The method normally used to design this type of structures is based on the Effective Width concept. The Effective Wid...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Doboku Gakkai Ronbunshu
سال: 1984
ISSN: 0289-7806,1882-7187
DOI: 10.2208/jscej.1984.357