Lithium-Metal Foil Surface Modification: An Effective Method to Improve the Cycling Performance of Lithium-Metal Batteries
نویسندگان
چکیده
منابع مشابه
Ionic Liquid Electrolytes for Li–Air Batteries: Lithium Metal Cycling
In this work, the electrochemical stability and lithium plating/stripping performance of N-butyl-N-methylpyrrolidinium bis(trifluoromethanesulfonyl)imide (Pyr14TFSI) are reported, by investigating the behavior of Li metal electrodes in symmetrical Li/electrolyte/Li cells. Electrochemical impedance spectroscopy measurements and galvanostatic cycling at different temperatures are performed to ana...
متن کاملQuantifying the dependence of dead lithium losses on the cycling period in lithium metal batteries.
We quantify the effects of the duration of the charge-discharge cycling period on the irreversible loss of anode material in rechargeable lithium metal batteries. We have developed a unique quantification method for the amount of dead lithium crystals (DLCs) produced by sequences of galvanostatic charge-discharge periods of variable duration τ in a coin battery of novel design. We found that th...
متن کاملStrong texturing of lithium metal in batteries.
Lithium, with its high theoretical specific capacity and lowest electrochemical potential, has been recognized as the ultimate negative electrode material for next-generation lithium-based high-energy-density batteries. However, a key challenge that has yet to be overcome is the inferior reversibility of Li plating and stripping, typically thought to be related to the uncontrollable morphology ...
متن کاملMetal hydrides for lithium-ion batteries.
Classical electrodes for Li-ion technology operate via an insertion/de-insertion process. Recently, conversion electrodes have shown the capability of greater capacity, but have so far suffered from a marked hysteresis in voltage between charge and discharge, leading to poor energy efficiency and voltages. Here, we present the electrochemical reactivity of MgH(2) with Li that constitutes the fi...
متن کاملStructural modulation of lithium metal-electrolyte interface with three-dimensional metallic interlayer for high-performance lithium metal batteries
The use of lithium (Li) metal anodes has been reconsidered because of the necessity for a higher energy density in secondary batteries. However, Li metal anodes suffer from 'dead' Li formation and surface deactivation which consequently form a porous layer of redundant Li aggregates. In this work, a fibrous metal felt (FMF) as a three-dimensional conductive interlayer was introduced between the...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Advanced Materials Interfaces
سال: 2017
ISSN: 2196-7350
DOI: 10.1002/admi.201700166