Liquid-Solid Phase Equilibria of Nb-Si-Ti Ternary Alloys
نویسندگان
چکیده
منابع مشابه
Thermal stability and phase transformations of martensitic Ti–Nb alloys
Aiming at understanding the governing microstructural phenomena during heat treatments of Ni-free Ti-based shape memory materials for biomedical applications, a series of Ti-Nb alloys with Nb concentrations up to 29 wt% was produced by cold-crucible casting, followed by homogenization treatment and water quenching. Despite the large amount of literature available concerning the thermal stabilit...
متن کاملPhase Equilibria in Prototype Nb-Pd-Hf-Al Alloys
The phase equilibria in two prototype alloys with nominal compositions 60Nb-20Pd-10Hf-10Al and 40Nb-30Pd-15Hf-15Al (in at. pct) are investigated using scanning electron microscopy and X-ray diffraction. The alloys were heat treated at 1200 °C and 1500 °C for 200 hours each. The phase analysis revealed that the alloys were, for the most part, in the three-phase equilibrium between (Nb), Pd2HfAl,...
متن کاملTRIBOLOGICAL PROPERTIES OF Ti-Si-Zr ALLOYS
Nowadays titanium alloys are extensively used for aerospace and biomedical applications. However, despite good mechanical properties and excellent corrosion resistance they possess poor wear resistance and a tendency to galling and seizure. In this study the tribological properties of experimental Ti-Si-Zr based alloys were studied using a standard ball-on-disc wear testing system. The wear and...
متن کاملInfluence of Heat Treatment on Properties of Ti-nb Alloys
L. Kuncicka, J. Kliber, VŠB – Technical University of Ostrava, Faculty of Metallurgy and Materials Engineering, Czech Republic P. Stepan, VŠB – Technical University of Ostrava, Faculty of Metallurgy and Materials Engineering, Czech Republic I. Mamuzic, Croatian Metallurgical Society, Zagreb, Croatia Ti-Nb alloys are of a large potential for industrial, as well as biomedical utilisation. Ox ygen...
متن کاملMechanical properties and grindability of dental cast Ti-Nb alloys.
Aiming at developing a dental titanium alloy with better mechanical properties and machinability than unalloyed titanium, a series of Ti-Nb alloys with Nb concentrations up to 30% was made. They were cast into magnesia-based molds using a dental casting machine and the mechanical properties and grindability of the castings were examined. The hardness of the alloys with Nb concentrations of 5% a...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Chinese Journal of Aeronautics
سال: 2008
ISSN: 1000-9361
DOI: 10.1016/s1000-9361(08)60036-9