Liquid metal embrittlement and deformation induced martensite: The case of 316 L austenitic steel LME by liquid eutectic gallium-indium
نویسندگان
چکیده
The liquid metal embrittlement sensitivity of a low nickel 316 L austenitic steel has been studied with eutectic gallium indium alloy. case is firmly established this and by X-Ray fractography EBSD. Brittle to ductile recoveries were observed via dedicated parametric study (varying cross-head speed temperature). return ductility temperature strongly correlated significant reduction in plastically induced α’ phase change suggesting it requirement for LME. This implies strategy focused on limiting deformation martensite design LME resistant steels at temperature.
منابع مشابه
Effect of oxidation on the mechanical properties of liquid gallium and eutectic gallium-indium
Related Articles Phase diagram and universality of the Lennard-Jones gas-liquid system J. Chem. Phys. 136, 204102 (2012) New exact solutions for Hele-Shaw flow in doubly connected regions Phys. Fluids 24, 052101 (2012) Interfacial and coexistence properties of soft spheres with a short-range attractive Yukawa fluid: Molecular dynamics simulations J. Chem. Phys. 136, 154702 (2012) Molecular dyna...
متن کاملEutectic gallium-indium (EGaIn): a moldable liquid metal for electrical characterization of self-assembled monolayers.
Herein we describe the formation of conformal electrodes from the fluid metal eutectic, Ga–In (which we abbreviate “EGaIn” and pronounce “e-gain”; 75% Ga, 25% In by weight, m.p.= 15.5 8C), and their use in studying charge transport across self-assembled monolayers (SAMs). Although EGaIn is a liquid at room temperature, it does not spontaneously reflow into the shape with the lowest interfacial ...
متن کاملFrequency-Switchable Metamaterial Absorber Injecting Eutectic Gallium-Indium (EGaIn) Liquid Metal Alloy
In this study, we demonstrated a new class of frequency-switchable metamaterial absorber in the X-band. Eutectic gallium-indium (EGaIn), a liquid metal alloy, was injected in a microfluidic channel engraved on polymethyl methacrylate (PMMA) to achieve frequency switching. Numerical simulation and experimental results are presented for two cases: when the microfluidic channels are empty, and whe...
متن کاملEutectic Gallium-Indium (EGaIn): A Liquid Metal Alloy for the Formation of Stable Structures in Microchannels at Room Temperature
This paper describes the rheological behavior of the liquid metal eutectic gallium-indium (EGaIn) as it is injected into microfluidic channels to form stable microstructures of liquid metal. EGaIn is well-suited for this application because of its rheological properties at room temperature: it behaves like an elastic material until it experiences a critical surface stress, at which point it yie...
متن کاملMechanical behaviour of a new automotive high manganese TWIP steel in the presence of liquid zinc
iii Abstract: High manganese TWIP (TWinning Induced Plasticity) steels are particularly attractive for automotive applications because of their exceptional properties of strength combined with an excellent ductility. However, as austenitic steels, they appear to be sensitive to liquid zinc embrittlement during welding, the liquid zinc arising from the melted coating due to the high temperatures...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Corrosion Science
سال: 2021
ISSN: ['1879-0496', '0010-938X']
DOI: https://doi.org/10.1016/j.corsci.2021.109850