Liquid condition monitoring using physical sensors
نویسندگان
چکیده
منابع مشابه
Pump Condition Monitoring Using Self-Powered Wireless Sensors
Fluid pumps are critical elements in many industrial, commercial, and marine systems. Continuous monitoring of pump systems is the most effective technique to insure efficient operation, help prevent unexpected pump failures, reduce repair costs and downtime, and provide early warning to avoid loss of pumped fluid. Wireless sensors are gaining increasing interest for equipment monitoring and su...
متن کاملVirtual Techniques for Liquid Level Monitoring Using Differential Pressure Sensors
The purpose of presented paper is to demonstrate an innovative approach for low cost continuous liquid level monitoring based on virtual instrumentation. Most of the traditional measuring systems were designed and implemented by complicated hardware circuitry. It made the product expensive, with low functionality and with limited precision. With virtual measurement technology, more of the instr...
متن کاملThin Film Sensors for Condition Monitoring in Ball Screw Drives
The development of sensor pins which can be easily integrated into ball screw drives for preload measurement is described in this paper. The sensor’s base body consists out of a steel pin with a special shaped load region. This complex surface is coated and structured with a sensory thin film system based on a hydrogenated carbon layer. The layer shows an excellent tribological stability combin...
متن کاملA suite of optical fibre sensors for structural condition monitoring
This paper is to review the research activities at City University London in the development of a range of fibre Bragg grating (FBG)-based sensors, including strain, temperature, relative humidity, vibration and acoustic sensors, with an aim to meet the increasing demands from industry for structural condition monitoring. As a result, arrays of optical fibre sensors have been instrumented into ...
متن کاملConstruction Condition and Damage Monitoring of Post-Tensioned PSC Girders Using Embedded Sensors
The potential for monitoring the construction of post-tensioned concrete beams and detecting damage to the beams under loading conditions was investigated through an experimental program. First, embedded sensors were investigated that could measure pre-stress from the fabrication process to a failure condition. Four types of sensors were installed on a steel frame, and the applicability and the...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Procedia Engineering
سال: 2011
ISSN: 1877-7058
DOI: 10.1016/j.proeng.2011.12.163