Linear MIMO controller design for an industrial reactive distillation column
نویسندگان
چکیده
منابع مشابه
A Short Method for the Design of Reactive Distillation Column
In this study, a short method for the design of reactive distillation is presented. The method is based on distillation lines and tray-by-tray calculations, and a new strategy is suggested to locate the reflux ratio, the number of stages, and feed tray. The material balances are solved from the outside (top and bottom) to the inside of the distillation column (feed), to ensure that the product ...
متن کاملSimulation Of Reactive Distillation Column
Reactive distillation processes couple chemical reactions and physical separations into a single unit operation. The ethyl acetate production by esterification reaction is equilibrium limited and is suitable to be carried out in a distillation column. In the present work, a reactive distillation column for the production of ethyl acetate is simulated using Aspen Plus. The component compositions...
متن کاملThe Advanced Process Control System for an Industrial Distillation Column
The control problem of an industrial distillation column is studied. Just the top control loop is discussed in this paper. By means of data collected from the distributed control system (DCS), two soft sensors are first developed. Based on this work, an inferential control project was proposed, and an optimization framework added on it, to improve control performance further. This advanced proc...
متن کاملSoft Switching MBC Controller for MIMO Linear Hybrid Systems
Switching supervisory is the most important section of a feedback control process inMIMO hybrid systems. By choosing a non-compatible controller, system may go tounstable mode or high overshoot response. In this paper, a new method of switchingfor selecting MBC controllers is discussed. Results of the simulation show the MIMO(2-in 2-out) linear hybrid system can be switched stable and low overs...
متن کاملExergetic and Economic Analysis of an Industrial Distillation Column
In this work, applications of exergy and economic concepts to compression, heat exchange, and separation processes were used for calculation of the irreversibility rate, thermodynamic efficiency, and internal rate of return (IRR) of the profitability. A case study based on a real process, the purification of 1,2dichloroethane (DCE) in a high-purity distillation column, is presented. This column...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IFAC Proceedings Volumes
سال: 2001
ISSN: 1474-6670
DOI: 10.1016/s1474-6670(17)33811-9