Linear Low Density Polyethylene Resins for Breathable Microporous Films
نویسندگان
چکیده
منابع مشابه
Oxygen-barrier films based on low-density polyethylene/ ethylene vinyl alcohol/ polyethylene-grafted maleic anhydride compatibilizer
In this research, high oxygen-barrier films were organized based on low-density polyethylene (LDPE)/ ethylene vinyl alcohol (EVOH)/ polyethylene-grafted maleic anhydride (LDPE-g-MA) compatibilizer. The effects of 10–30 wt. % EVOH and 0–10 wt. % LDPE-g-MA loadings on the properties of final films were evaluated. The morphology of specimens was observed by using scanning electron microscopy (SEM)...
متن کاملThermo-Oxidation and Biodegradation Study of Low-Density Polyethylene /Starch Films by IR Spectroscopy
This article reports a study of the thermo-oxidation and biodegradation in the soil of low-density polyethylene/starch films (LDPE/starch) by infrared spectroscopy: Films of LDPE/Starch blends of different composition (starch content range from 0 to 15% w/w),were prepared and exposed to thermo-oxidation at different temperatures at 80, 90 and 100°C,and buried in the soil of public dump duri...
متن کاملoxygen-barrier films based on low-density polyethylene/ ethylene vinyl alcohol/ polyethylene-grafted maleic anhydride compatibilizer
in this research, high oxygen-barrier films were organized based on low-density polyethylene (ldpe)/ ethylene vinyl alcohol (evoh)/ polyethylene-grafted maleic anhydride (ldpe-g-ma) compatibilizer. the effects of 10–30 wt. % evoh and 0–10 wt. % ldpe-g-ma loadings on the properties of final films were evaluated. the morphology of specimens was observed by using scanning electron microscopy (sem)...
متن کاملGrafting of Acrylamide to Low Density Polyethylene During Melt Processing
Acrylamide was grafted in low density polyethylene during melt processing in the presence of a free radical initiator using a torque rheometer in a closed system. Effects of processing time, acrylamide and benzoyl peroxide concentrations were studied. FTIR studies revealed that the degree of grafting increased by an increase in acrylamide concentration. Maximum grafting was obtained at 7 mi...
متن کاملCatalytic conversion of waste low density polyethylene into fuel oil
Waste Low density polyethylenes (LDPE) represent a source of energy and valuablechemicals, were pyrolysed catalytically in a batch reactor under atmospheric pressure. Calciumcarbide was used as a catalyst to explore its effect on pyrolysis product distribution. The effect oftemperature, amount of catalyst and time on the yields of the pyrolysed products wasinvestigated. The effect of catalyst o...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Nonwovens Journal
سال: 2002
ISSN: 1527-2494,1527-2494
DOI: 10.1177/1558925002os-01100308