Linear Elastic FE-Analysis of Porous, Laser Welded, Heat Treatable, Aluminium High Pressure Die Castings Based on X-Ray Computed Tomography Data
نویسندگان
چکیده
منابع مشابه
Modern High Pressure Die-casting Processes for Aluminium Castings
There are about 33 processes commercially available for the production of aluminium castings. About 70% of the castings are produced using conventional high-pressure die-casting process. It’s main drawbacks are 1) Air and gas blow holes 2) Unable to weld 3) unable to heat treat to enhance mechanical properties. To overcome these, many modern processes have been invented. A few of them are 1) Hi...
متن کاملX-ray Computed Tomographic Inspection of Castings
Casting is an economical way to manufacture parts. On average, complex aerospace castings incur about one-fourth the cost of forgings. However, castings can not be used as primary structure in aircraft because of poor control over design allowables for the material strength and ductility. They can be used as secondary structure, but must include significant safety factors usually between 3 and ...
متن کاملHigh-pressure x-ray tomography microscope: Synchrotron computed microtomography at high pressure and temperature
A new apparatus has been developed for microtomography studies under high pressure. The pressure generation mechanism is based on the concept of the widely used Drickamer anvil apparatus, with two opposed anvils compressed inside a containment ring. Modifications are made with thin aluminum alloy containment rings to allow transmission of x rays. Pressures up to 8 GPa have been generated with a...
متن کاملPrediction of the elastic modulus of the trabecular bone based on X-ray computed tomography
This work aims to estimate the apparent Young’s modulus of real human trabecular bones using a numerical micro-macro approach. Cylindrical specimens of trabecular bone were extracted from human femur heads, cleaned and scanned using a SkyScan-1072 micro-computed tomography system. 3D volumetric tetrahedral grids were generated from the exploitation of the reconstructed images using original mes...
متن کاملEvaluation of 3D fiber orientation analysis based on x-ray computed tomography data
Many products in automotive applications are using fiber reinforced polymers due to the advantage of light weight and better mechanical properties. The effect of fiber reinforcement is directly dependent on the length and orientation of the fibers within the polymer matrix. The established methods to measure quantitatively fiber orientation are destructive analyses based on 2D polished sections...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials
سال: 2020
ISSN: 1996-1944
DOI: 10.3390/ma13061420