Linear creep of bonded FRP-strengthened metallic structures at warm service temperatures
نویسندگان
چکیده
Abstract Ambient cured epoxy adhesive is widely used for bonding fibre reinforced polymer (FRP) plates to metallic structures. The present paper examines a typical strengthening investigate the effect of thermo-viscoelasticity. response was determined using series tests multi-frequency scanning mode dynamic mechanical analyser (DMA). thermo-mechanical properties were then characterised time–temperature superposition parameters and Prony representation generalised Maxwell creep. in turn within two finite element (FE) models examine creep at warm temperatures (
منابع مشابه
Modeling of FRP-Strengthened Infill Masonry Structures
This paper presents an analytical approach to describe the behavior and mode of failure of infill masonry structures strengthened with fiber-reinforced polymer (FRP) materials. The approach is used to simulate the response of strengthened infill masonry walls under the effect of out-of-plane uniformly distributed pressure simulating wind pressure. The approach includes a finite element analysis...
متن کاملEffect of Adhesive Viscoelasticity on the Creep Behaviour of FRP Strengthened Concrete Beams
This paper focuses on the effect of the viscoelasticity of the adhesive layer on the flexural creep response of reinforced concrete beams strengthened with composite materials. A theoretical model is developed, which considers the strengthened beam as a layered structure that consists of the reinforced concrete beam, the adhesive layer, and the FRP strip, and accounts for the creep of each comp...
متن کاملNumerical Simulation of Debonding Failure of Reinforced Concrete Beams Strengthened with Externally Bonded Frp
As the life age of the existing structures are required to meet the changing demands on civil infrastructures. So strengthening and retrofitting are required. Recently many techniques to strengthen the reinforced concrete beams in flexural by using fiber reinforced polymer (FRP) had appeared. The most famous technique among them is strengthening the (RC) beams with externally bonded FRP sheet t...
متن کاملDebonding Failures of Rc Beams Strengthened with Externally Bonded Frp Reinforcement: Behaviour and Modelling
Both the flexural and shear strengths of reinforced concrete (RC) beams can be substantially enhanced using externally bonded fibre reinforced polymer (FRP) composites. Failures of such FRP-strengthened RC beams often occur by debonding of the FRP plate from the RC beam in a number of forms. Despite numerous theoretical and experimental studies on debonding failures of FRP-strengthened RC beams...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Construction and Building Materials
سال: 2021
ISSN: ['1879-0526', '0950-0618']
DOI: https://doi.org/10.1016/j.conbuildmat.2021.122699