Limiting stiffness coefficients analysis of texture foil journal bearing
نویسندگان
چکیده
منابع مشابه
Foil Bearing Stiffness Estimation with Pseudospectral Scheme
Compliant foil gas lubricated bearings are used for the support of light loads in the order of few kilograms at high speeds, in the order of 50,000 RPM. The stiffness of the foil bearings depends both on the stiffness of the compliant foil and on the lubricating gas film. The stiffness of the bearings plays a crucial role in the stable operation of the supported rotor over a range of speeds. Th...
متن کاملThe Effect of Damping and Stiffness of Bearing on the Natural Frequencies of Rotor-bearing System
In this paper, the effectiveness of stiffness and damping of bearing is investigated on the natural frequencies of the rotor-bearing system. The rotor-bearing system consists of a shaft, two bearings and a disk between two bearings. Parallel spring-damper in horizental and vertical directions is considered for modeling the stiffness and damping of bearings. The gyroscopic effect is also conside...
متن کاملStudy on Lubrication Performance of Journal Bearing with Multiple Texture Distributions
The lubrication performance of journal bearings with different sorts of uniformly distributed micro-spherical textures are studied in this paper. Geometries and dynamic models of journal bearings with pure concave/convex textures are developed. The validity of the proposed models is verified against the oil film pressure distribution from the literature. The effects of geometry parameters (the ...
متن کاملIsothermal Analysis of Elliptic Bore Journal Bearing Considering Isotropic Roughness
121804-6565-IJMME-IJENS © August 2012 IJENS I J E N S Abstract— Finite journal bearing of elliptic bore and circular bush is analyzed considering the isotropic roughness in the bearing surfaces. The angle of inclination of the major axis of the sleeve to the load line and the attitude angle are kept constant while evaluating all the performance parameters. Film shape due to the rough elliptic b...
متن کاملA Comprehensive Model for Stiffness Coefficients in V-Shaped Cantilevers
During past decade the AFM based nanomanipulation has been focus of attention as the promising nano fabrication approach. The main challenge in this process is the real-time monitoring. Consequently, the dynamic models have been proposed as a solution to the existing challenge. In the modeling approach the magnitudes of the forces are proportional to the stiffness coefficients o...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IOP Conference Series: Materials Science and Engineering
سال: 2020
ISSN: 1757-899X
DOI: 10.1088/1757-899x/912/2/022031