Life Cycle Assessment of Post-combustion CO2 Capture and CO2-Enhanced Oil Recovery Based on the Boundary Dam Integrated Carbon Capture and Storage Demonstration Project in Saskatchewan
نویسندگان
چکیده
منابع مشابه
Post-combustion CO2 capture with a commercial activated carbon: comparison of different regeneration strategies
A commercial activated carbon supplied by Norit, R2030CO2, was evaluated as CO2 adsorbent under conditions relevant to post-combustion CO2 capture (ambient pressure and diluted CO2). It has been demonstrated that this carbon possesses sufficient CO2/N2 selectivity in order to efficiently separate a binary mixture composed of 17 % CO2 in N2. Moreover, this carbon was easily completely regenerate...
متن کاملRisk assessment for future CO2 Sequestration Projects Based CO2 Enhanced Oil Recovery in the U.S
This paper is the first of a series that attempts to assess the possible health and safety risks associated with large scale CO2 sequestration in deep brine reservoirs. The approach is based on analysis of available data on the operational track record from CO2 transportation and injection associated with enhanced oil recovery (CO2-EOR) in the US. This paper is particularly concerned with ident...
متن کاملEnergy Savings Potential through Waste Heat Recovery from Flue Gas for Post Combustion Co2 Capture
Flue gas from a plant using fossil fuels contains CO2. Thus power/process plants using fossil fuels contribute to climate change if CO2 in flue gas is not captured. The process of CO2 capture from flue gas is called „postcombustion‟ CO2 capture. Existing plants may be retrofitted with this process to minimize CO2 emission. Amine solutions are mostly used for this process to scrub the flue gas. ...
متن کاملOptimal conception of a post-combustion CO2 capture unit with assessment of solvent degradation
The combination of growing energy demand and environmental concerns has made the development of CO2 capture and storage technologies a necessity for the near-future energy mix. Post-combustion CO2 capture is one of the most mature technologies for reducing CO2 emissions in power plants. As a next step for the technology development, large-scale demonstration capture plants have to be implemente...
متن کاملBiomass Waste Carbon Materials as adsorbents for CO2 Capture under Post-Combustion Conditions
A series of porous carbon materials obtained from biomass waste have been synthesized, with different morphologies and structural properties, and evaluated as potential adsorbents for CO2 capture in post-combustion conditions. These carbon materials present CO2 adsorption capacities, at 25°C and 101.3 kPa, comparable to those obtained by other complex carbon or inorganic materials. Furthermore,...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Energy Procedia
سال: 2014
ISSN: 1876-6102
DOI: 10.1016/j.egypro.2014.11.776