Length Parameter for Scaling Abutment Scour Depth
نویسندگان
چکیده
منابع مشابه
ANFIS approach to the scour depth prediction at a bridge abutment
Mohammad Muzzammil Department of Civil Engineering, AMU, Aligarh, UP 202002, India E-mail: [email protected] An accurate estimation of the maximum possible scour depth at bridge abutments is of paramount importance in decision-making for the safe abutment foundation depth and also for the degree of scour counter-measure to be implemented against excessive scouring. Despite analysis of...
متن کاملPractical Approach to Estimating Realistic Depths of Abutment Scour
Observations of bridge abutment scour lead to a practical new approach for estimating realistic scour IIHR-Hydroscience and Engineering depths at bridge abutments. Prior design approaches usually led to unrealistically deep estimates of abutment scour depth. The observations presented stem from flume experiments conducted with abutments with approach embankments subject to a range of erodibilit...
متن کاملPredicting Bridge Pier Scour Depth with SVM
Prediction of maximum local scour is necessary for the safety and economical design of the bridges. A number of equations have been developed over the years to predict local scour depth using laboratory data and a few pier equations have also been proposed using field data. Most of these equations are empirical in nature as indicated by the past publications. In this paper attempts have been ma...
متن کاملbridge abutment scour in compound river channels
most previous laboratory studies of local scour at bridge abutments were performed in rectangular channels in which the distributions of flow velocity and bed shear stress were considered uniform in the transverse direction. in reality however, bridge abutments are usually located in the floodplain zone of rivers where velocity and shear stress distributions are directly affected by the lat...
متن کاملToe protection for spill-through and vertical-wall abutments
This study addresses the design of riprap aprons as a scour countermeasure near abutments under clear-water conditions. It deals with the lateral extent of riprap aprons and the geometry of the scour hole prevailing at the apron edge. The study applies to riprap aprons acting as granular filters. The scour depth appears to be independent for a sufficiently long relative abutment length. Scour h...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Water
سال: 2020
ISSN: 2073-4441
DOI: 10.3390/w12123508