LED Driver Compatible with Both Electronic and Magnetic Ballasts
نویسندگان
چکیده
منابع مشابه
LED Driver Lifetime and Reliability
While LEDs themselves are extremely reliable and have a long lifetime, are electronic LED drivers capable of providing the required current/voltage input to the LEDs over their whole lifetime? This paper aims to address the above question in general and for the Xitanium family of LED drivers developed by Philips Lighting specifically. It will describe some of the strategies which Philips applie...
متن کاملDynamic Interaction of High Frequency Electronic Ballasts and Fluorescent Lamps
Fluorescent lamps are non-linear devices that exhibit negative resistance over the useful range of operation. At low frequency, this negative resistance peculiarity is passed through during each period of the AC driving current [1]. When the fluorescent lamp operates at high frequency, the negative resistance is associated with the average power rather than with the instantaneous, cycle by cycl...
متن کاملAn Isolated Off-Line High Power Factor Electrolytic Capacitor-Less LED Driver with Pulsating Output Current
One of the most efficient lighting technology is based on light-emitting diodes (LEDs). Common LED drivers with AC-input (50-60Hz) usually require a bulk electrolytic capacitor to decrease low-frequency ripple in the output. However, the critical element that limits the lifespan of the LED driver is the electrolytic capacitor. An isolated off-line LED driver is proposed in this paper, in which ...
متن کاملSmall-Signal Analysis of Frequency-Controlled Electronic Ballasts
This paper presents analytical tools aimed at improving and simplifying the development of frequency-controlled dimming electronic ballasts. A modified phasor transformation is proposed that converts a frequency-modulated signal into an equivalent time-varying phasor. The proposed transformation is applied to develop a complete small-signal phasor model of the LCC resonant ballast, which explic...
متن کاملOverstress-Free Charge Pump White LED Driver
This paper presented a white light emitting diode (LED) driver that utilized charge pump in boosting the input voltage. The output voltage had been made sure that it was sufficient enough to overcome the forward voltage of the LED as well as provide voltage headroom for the transistors in every LED channel branch. The charge pump and its peripheral circuit, the clock booster circuit, do not suf...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: The Transactions of the Korean Institute of Power Electronics
سال: 2016
ISSN: 1229-2214
DOI: 10.6113/tkpe.2016.21.1.42