Lead–Steel Layered Composite Electrode for Adiponitrile Production: Preparation and Electrochemical Properties
نویسندگان
چکیده
Lead–steel layered composite electrode materials have been successfully prepared by the roll bonding method. Scanning electron microscopy and energy dispersion spectroscopy (EDS) were used to analyze microstructures elements distribution at interface. The electrochemical properties of samples studied linear sweep voltammetry (LSV), Tafel curves, a weight loss analysis microstructure showed that metallurgical bond between hot-dipped steel lead plate could be achieved conductivity, electrocatalytic activity, corrosion resistance lead–steel improved with increase in rolling reduction ratio. industrial production results ratio 40% exhibited best performance, 4.94% current efficiency, 19.4% average cell voltage, 4.86% adiponectin yield compared traditional Pb-0.6%Ag electrode.Graphical Abstract
منابع مشابه
Electrochemical preparation and characteristics of Ni–Co–LaNi5 composite coatings as electrode materials for hydrogen evolution
Electrocatalytic activity for the hydrogen evolution reaction on Ni–Co–LaNi5 composite electrodes prepared by electrochemical codeposition technique was evaluated. The relationship between the current density for hydrogen evolution reaction and the amount of LaNi5 particles in Ni–Co baths is like the well-known “volcano plot”. The Surface morphology and microstructure of Ni–Co–LaNi5 coatings we...
متن کاملPreparation and electrochemical properties of glass-polymer composite electrolytes for lithium batteries
Electrochemical behavior of a new class of glass-polymer composites (GPC), consisting of (100-x) ~01% (0.56LizS~0.19B~S,.0.25LiI) glass and x ~01% (P(E0)6.LiN(CF$O&) polymer with x = 7, 13 and 25, has been investigated in cells with different electrodes. Results show that the addition of the polymer to the glass powder increases not only the mechanical flexibility but also the ionic conductivit...
متن کاملNile Blue- Chitosan Composite as a new Electrochemical Sensor for Uric Acid on Glassy Carbon Electrode
Nile blue-Chitosan NB-CH as a new type of organic days-organic composite was made using Nile blue and chitosan. The NB-CH composite was made using a 0.005 M solution of Nile blue NB and a 7 solution of chitosan. To do this, a mixture of Nile blue and Chitosan with the ratio of 2:1 was prepared. The electrocatalytic oxidation of uric acid UA has been studied on glassy carbon electrode by NB-CH u...
متن کاملPreparation and Characterization of Cork Layered Composite Plywood Boards
In the furniture and construction industries, there is increased demand for lightweight, high-performance, and low-maintenance materials with specific properties. Increased demand necessitates testing of new and composite materials to find a viable alternatives to classical materials. In this study, two different types of cork layered plywood composites (plywood board with a cork core (PLYW-K1)...
متن کاملPreparation of Ni-P-CeO2 electrode and study on electrocatalytic properties for hydrogen evolution reaction
In this study ternary Ni-P-CeO2 catalysts were first synthesized by the Co-electrodeposition method on a copper substrate and then characterized by means of microstructural and electrochemical techniques toward a hydrogen evolution reaction (HER). Also, for comparison other catalysts such as Ni-CeO2, Ni-P, and Ni were prepared and characterized by the same methods. The microstructure of the inv...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Electronic Materials
سال: 2022
ISSN: ['0361-5235', '1543-186X']
DOI: https://doi.org/10.1007/s11664-021-09417-2