Lead-free Solder Technology and Reliability for Automotive Electronics
نویسندگان
چکیده
منابع مشابه
Solder Joints in Electronics: Design for Reliability
The emerging new technologies provide ever more challenges to assure the reliability of electronic products. The ever increasing demands in electronic products for higher performance, lower cost, less space (weight) is leading to ever denser interconnection needs. This makes solder joint reliability an even more important issue with the advent of new surface mount packages and the use of surfac...
متن کاملThermal Cycling Reliability of Chip Resistor Lead Free Solder Joints
The solder joint reliability of ceramic chip resistors assembled to laminate substrates has been a long time concern for systems exposed to harsh environments such as those found in automotive and aerospace applications. This is due to a combination of the extreme temperature excursions experienced by the assemblies along with the large coefficient of thermal expansion mismatches between the al...
متن کاملSolder Creep-Fatigue Model Parameters for SAC & SnAg Lead-Free Solder Joint Reliability Estimation
For many of the Pb-free solders required under the European RoHS directive, there is now sufficient information, primarily in the form of the results of accelerated thermal cycling of various levels of severity, to develop acceleration models for the creep-fatigue of these solders. In this paper the parameters for the SAC405/305, SAC205, SAC105 and SnAg to replace the parameters for eutectic Sn...
متن کاملLead-free Solder Assembly
Until non-lead solder conversion is mature, the evaluation of materials and components is likely to identify trade-offs. The performance of the no-clean andwater-soluble solder pastes that were tested varied widely. Ultimately each company will need to determine which attributes are most important for their product line. Also components needed for a product may not be currently available as lea...
متن کاملHigh Reliability Lead-free Solder SN100C(Sn-0.7Cu-0.05Ni+Ge)
While the situation varies from country to country, nearly one year after the EU RoHS Directive came into force implementation of lead-free solder is progressing steadily. For lead-free soldering to be considered successful it is not sufficient just to have dealt with the challenges of mass production. It is also necessary to establish that the soldered joints produced are at least as reliable ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Microelectronics and Packaging Society
سال: 2015
ISSN: 1226-9360
DOI: 10.6117/kmeps.2015.22.3.001