Lead-free Solder for Automotive Electronics and Reliability Evaluation of Solder Joint
نویسندگان
چکیده
منابع مشابه
Solder Creep-Fatigue Model Parameters for SAC & SnAg Lead-Free Solder Joint Reliability Estimation
For many of the Pb-free solders required under the European RoHS directive, there is now sufficient information, primarily in the form of the results of accelerated thermal cycling of various levels of severity, to develop acceleration models for the creep-fatigue of these solders. In this paper the parameters for the SAC405/305, SAC205, SAC105 and SnAg to replace the parameters for eutectic Sn...
متن کاملMechanical Properties and Solder Joint Reliability of Low-Melting Sn-Bi-Cu Lead Free Solder Alloy
The influence of alloy composition of lowmelting Sn-Bi-Cu lead-free solder alloys on mechanical properties and solder joint reliabilities were investigated. The mechanically optimum alloy composition is Sn-40Bi-0.1Cu (mass%). The addition of 40mass%Bi improves the ductility and restrains the fillet-lifting, which are problems of lead-free solders with Bi. The addition of copper improves both th...
متن کاملLead-free Solder Joint Quality Investigation
New Pb-free materials ask thorough verification because their properties as wetting, solderability and mechanical properties are different from these SnPb. In this paper are presented some new facts from creep and stress relaxation investigation including new arrangement for measurement. Results from creep, stress, shear and bend testing are presented for three types of solder (Sn/3.5Ag, Sn/3.8...
متن کاملLead-free Solder Assembly
Until non-lead solder conversion is mature, the evaluation of materials and components is likely to identify trade-offs. The performance of the no-clean andwater-soluble solder pastes that were tested varied widely. Ultimately each company will need to determine which attributes are most important for their product line. Also components needed for a product may not be currently available as lea...
متن کاملStacked solder bumping technology for improved solder joint reliability
Reliability in flip chip and Ball Grid Array is a major concern. Solder joint geometry is extremely important from a reliability point of view. Commonly, the flip chip solder bump takes on the shape of a spherical segment. Mathematical calculations and finite element modeling have shown that the hourglass-shaped solder bumps experience the lowest plastic strain and have the longest lifetime. In...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Welding and Joining
سال: 2016
ISSN: 2466-2232
DOI: 10.5781/jwj.2016.34.1.26