Leaching Behavior of Gold and Silver from Concentrated Sulfide Ore Using Ammonium Thiosulfate
نویسندگان
چکیده
منابع مشابه
DETERMINATION OF THE OPTIMUM CONDITIONS FOR RECOVERY OF GOLD FROM ZARSHURAN REFRACTORY GOLD SULFIDE ORE
The orthogonal array design has been used to determine the optimum conditions for gold recovery from Zarshuran refractory gold sulfide ore (Iran) by direct cyanidation and roasting-cyanidation. The Taguchi method was used as the experimental design to determine the optimum conditions of dissolution behavior of gold with cyanidation and roasting-cyanidation from Zarshuran refractory gold ore . T...
متن کاملEffect of Mechanical Activation on the Kinetics of Ammoniacal Thiosulfate Leaching of a Refractory Oxide Gold Ore
The effect of mechanical activation on the kinetics of ammoniacal thiosulfate leaching of a refractory oxide gold ore containing 2.8 ppm Au was investigated. The gold extraction of 99.81% was achieved by 16 h leaching of a sample mechanically activated for 60 minutes. The gold extraction observed for a similar reference sample without mechanical activation was only 55%. Studies revealed that le...
متن کاملLeaching of Gold and Silver from Crushed Au-Ag Wastes
Au-Ag noble metal wastes represent a wide range of waste types and forms with various ballast elements and components. The thiourea process of gold and silver extraction from ores, concentrates or secondary raw materials consists of gold and silver leaching into the thiourea solution and the consequent precipitation of these metals from the solution. Due to the non-toxic character of thiourea i...
متن کاملKinetics of chemical leaching of chalcocite from low-grade copper ore: size-distribution behavior
Kinetics of the chemical leaching of chalcocite from a low-grade copper ore in a ferric sulfate medium was investigated using the constrained least square optimization technique. The experiments were carried out for different particle sizes in both the reactor and column at constant Eh, pH, and temperature. The leaching rate increased with increase in the temperature. About 50% of the Cu recove...
متن کاملRecovery of Gold, Silver, Copper and Niobium from Printed Circuit Boards Using Leaching Column Technique
Nowadays, over 300 tons of Au are used in electronic equipment each year with other precious and strategic metals such as Ag, Pt, Pd, Cu, Nb, Ta, etc.. After the use-phase, the electronic devices become electronic waste (e-waste); consequently it is important to consider e-waste as a secondary supply for the recovery of these metals. This paper presents the recovery of Au, Ag, Cu and Nb from PC...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Metals
سال: 2020
ISSN: 2075-4701
DOI: 10.3390/met10081029