LCL Filter Parameter and Hardware Design Methodology for Minimum Volume Considering Capacitor Lifetimes
نویسندگان
چکیده
A design methodology for minimum volume of LCL filters applied to grid connected converters is proposed. It combines the determination filter parameter values (inductances and capacitances) hardware (component technology inductor construction). Using proposed strategy, different combinations L-C-L that meet standard restrictions are determined. The influence harmonic content results from considered in order estimate component losses, bus capacitor lifetimes. Results presented lead smallest volume, highest lifetime, or a compromise between both. case study with three magnetic material technologies two types capacitors done. experimentally validated 1 kW converter. Step-by-step procedures parameters provided.
منابع مشابه
LCL Filter Design and Performance Analysis for Grid Interconnected Systems
-The use of power converters is very important in maximizing the power transfer from renewable energy sources such as wind, solar, or even a hydrogen-based fuel cell to the utility grid. A LCL filter is often used to interconnect an inverter to the utility grid in order to filter the harmonics produced by the inverter. Even though there is an extensive amount of literature available describing ...
متن کاملThe Hardware Design of Parameter-Adjustable FIR Filter System
This design using FPGA parallel architecture, high computing speed and high-speed reliability of USB2.0 interface, designed an FPGA + USB2.0 + computer FIR digital filter system, organically combining the speed of FPGA and flexibility of Computer through USB2.0 bus. The results demonstrated that the coefficients configuring of the system is easy, which can adjust the filter coefficients flexibl...
متن کاملStability Improvement of Grid-connected Converter with LCL Filter based on Capacitor Current Active Damping by Computational Delay Reduction
Nowadays, LCL filters utilization to suppress the grid-connected inverter switching harmonics is expanding and various methods such as capacitor current active damping scheme could be investigated to damp out these harmonics. However, the computational delays including control system, and PWM switching delays have significant effect on damping system stability. In most of LCL filter parameter d...
متن کاملA Novel Design and Optimization Method of an $LCL$ Filter for a Shunt Active Power Filter
This paper analyses the characteristics of LCL filter in active power filter (APF) and provides an accurate for mula to determine the resonant frequency of system. Based on a single-phase equivalent circuit model, a systematic approach to design APF with LCL filter is proposed. Total inductance is determined by the capability of APF. Moreover, damping ratio, resonant frequency and attenuation d...
متن کاملA Zero - Crossing Switched - Capacitor Filter Design
Design of switched capacitor circuits in scaled CMOS technologies is becoming difficult because of low device intrinsic gain and reduced power supply voltage. To solve these problems, comparator-based switched-capacitor (CBSC) circuits and zero-crossing based circuits (ZCBC) were suggested as a possible solution to the op-amp based circuits. In this thesis, we explore zero-crossing based circui...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Energies
سال: 2022
ISSN: ['1996-1073']
DOI: https://doi.org/10.3390/en15124420