Layer Separation of Kenaf Bast Fiber and the Influence of Each Layer to the Kenaf Bast Paper Strength

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Viscoelastic Properties of Kenaf Bast Fiber in Relation to Stem Age

Kenaf (Hibiscus cannabinus L., Malvaceae) is a high-yielding tropical plant traditionally grown for the long, strong bast fibers that develop in the bark layer of the stem. Cultivation spread internationally in the early to mid-twentieth century, but interest waned, particularly in developed counties, as raw materials for cordage and related products shifted from biological to petrochemical sou...

متن کامل

Preparation and Properties of Kenaf Bast Fiber Filled Poly(lactic Acid) [plasticized] Composite

Kenaf bast fiber (KBF) filled plasticized poly(lactic acid) (p-PLA) composites was prepared and examined stage by stage in this study. Firstly, poly(lactic acid) (PLA) was plasticized with 5 up to 20 wt% poly(ethylene glycol) (PEG) via internal mixer. Blend with 10 wt% PEG was chosen as matrix for composite as it showed the best impact strength and elongation at break. Secondly, maleic anhydrid...

متن کامل

Effect of Impregnated Inorganic Nanoparticles on the Properties of the Kenaf Bast Fibers

The objective of this research was to evaluate the properties of the chemically retted kenaf bast fiber impregnated with the inorganic nanoparticles. High quality kenaf bast fibers were obtained from a chemical retting process. An in situ inorganic nanoparticle impregnation (INI) process was used to introduce the CaCO3 nanoparticles into the retted kenaf bast fibers. It was found that some of t...

متن کامل

Comparative Properties of Soda Pulps from Stalk, Bast, and Core of Malaysian Grown Kenaf

Soda pulping was performed using kenaf stalk, core, and bast as raw materials. It was observed that all these components could yield good paper characteristics when the resulting pulps were beaten to a freeness of 200 to 300 mL. Soda pulp made from the stalk was comparable to the frond from oil palm in sheet properties, but the latter would require higher beating energy to reach similar freenes...

متن کامل

A Chemical Process for Preparing Cellulosic Fibers Hierarchically from Kenaf Bast Fibers

The objective of this research was to evaluate an all-chemical process to prepare nano-scale to macro-scale cellulosic fibers from kenaf bast fibers, for polymer composite reinforcement. The procedure used in this all-chemical process included alkaline retting to obtain single cellulosic retted fiber, bleaching treatment to obtain delignified bleached fiber, and acidic hydrolysis to obtain both...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: JAPAN TAPPI JOURNAL

سال: 2005

ISSN: 0022-815X,1881-1000

DOI: 10.2524/jtappij.59.1354