Layer formation by resputtering in Ti–Si–C hard coatings during large scale cathodic arc deposition
نویسندگان
چکیده
منابع مشابه
Deposition of permalloy films by filtered cathodic vacuum arc
The filtered cathodic vacuum arc technique was employed to deposit magnetic films such as FeNi on silicon substrate. Using the normal cathode design, tetrahedral amorphous carbon and metals films can be deposited. If a magnetic target is used, the arc spot always preferably moves to the edge of the target and then extinguishes. Therefore, the arc is not stable and no film can be deposited. A ca...
متن کاملsimulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
Lubricant-Infused Nanoparticulate Coatings Assembled by Layer-by-Layer Deposition
© 2014 The Authors. Published by WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim 1 wileyonlinelibrary.com coatings on windows, lenses or solar cells, repellent or protective clothing, non-fouling marine vessels or biomedical devices, and anti-icing or drag-reducing surfaces. An ideal coating should ensure stable repellency, should be transparent in order not to affect color or transparency of the un...
متن کاملEvaluation of tribological properties of (Ti,Al)CN/DLC composite coatings deposited by cathodic arc method.
In this study, Ti, Al and N doped DLC – referred to here after as “(Ti,Al)CN/DLC composite”- coating and pure diamond-like coating (DLC) were produced by cathodic arc deposition technique and the effects of the coating thickness on their tribological properties were evaluated. The coatings were characterized, using scanning electron microscopy (SEM), atomic force microscopy (AFM), X-ray diffrac...
متن کاملCOMPARISON OF THE CrN , TiN AND (Ti, Cr)N PVD COATINGS DEPOSITED BY CATHODIC ARC EVAPORATION
In the present study, CrN, TiN and (Ti, Cr)N coatings were deposited on D6 tool steel substrates. Physical and mechanical properties of coatings such as microstructure, thickness, phase composition, and hardness were evaluated. Phase compositions were studies by X-ray diffraction method. Mechanical properties were determined by nano-indentation technique. The friction and wear behaviour of the ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Surface and Coatings Technology
سال: 2011
ISSN: 0257-8972
DOI: 10.1016/j.surfcoat.2011.02.007