Layer-by-layer photonic crystal fabricated by low-temperature atomic layer deposition
نویسندگان
چکیده
منابع مشابه
ZnS-based photonic crystal phosphors fabricated using atomic layer deposition
The infiltration by atomic layer deposition of three-dimensional opal structures has been investigated as a means of fabricating photonic crystal phosphors. ZnS:Mn infiltrated and inverse opals have been demonstrated with filling fractions >95%. Characterization of these structures by scanning electron microscopy, specular reflectance, and photoluminescence is reported. Specular reflectance mea...
متن کاملLow-temperature atomic layer epitaxy of AlN ultrathin films by layer-by-layer, in-situ atomic layer annealing
Low-temperature epitaxial growth of AlN ultrathin films was realized by atomic layer deposition (ALD) together with the layer-by-layer, in-situ atomic layer annealing (ALA), instead of a high growth temperature which is needed in conventional epitaxial growth techniques. By applying the ALA with the Ar plasma treatment in each ALD cycle, the AlN thin film was converted dramatically from the amo...
متن کاملBi-layer Channel AZO/ZnO Thin Film Transistors Fabricated by Atomic Layer Deposition Technique
This letter demonstrates bi-layer channel Al-doped ZnO/ZnO thin film transistors (AZO/ZnO TFTs) via atomic layer deposition process at a relatively low temperature. The effects of annealing in oxygen atmosphere at different temperatures have also been investigated. The ALD bi-layer channel AZO/ZnO TFTs annealed in dry O2 at 300 °C exhibit a low leakage current of 2.5 × 10-13A, I on/I off ratio ...
متن کاملLow Temperature Atomic Layer Deposition of Tin Oxide
Atomic layer deposition (ALD) of tin oxide (SnOx) films was achieved using a newly synthesized tin precursor and hydrogen peroxide. We obtained highly pure, conductive SnOx films at temperatures as low as 50 C, which was possible because of high chemical reactivity between the new Sn precursor and hydrogen peroxide. The growth per cycle is around 0.18 nm/cycle in the ALDwindow up to 150 C, and ...
متن کاملInfiltration and Inversion of Holographically Defined Polymer Photonic Crystal Templates by Atomic Layer Deposition
The demonstration of a practical technology for 3D optical microfabrication is a vital step in the development of photonic-crystal-based optical signal processing. However, the extension of the optical methods that dominate integrated electronic circuit fabrication to three dimensions is a formidable materials-processing challenge: such a process must be capable not only of sub-micrometer patte...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Applied Physics Letters
سال: 2007
ISSN: 0003-6951,1077-3118
DOI: 10.1063/1.2720752