Lattice Images of Amorphous-like Ni-B Films Prepared by the Electroless Plating Method
نویسندگان
چکیده
منابع مشابه
Roughness Optimization of Electroless Ni-B Coatings Using Taguchi Method
In this paper, the authors present an experimental study of roughness characteristics of electroless Ni-B coatings and optimization of the coating process parameters based on L27 Taguchi orthogonal design. Three coating process parameters are considered viz. bath temperature, reducing agent concentration, and nickel source concentration. It is observed that concentration of reducing agent toget...
متن کاملTetrahedral amorphous carbon films prepared by magnetron sputtering and dc ion plating
Highly tetrahedral, dense amorphous carbon ~ta-C! films have been deposited using rf sputtering of graphite by an unbalanced magnetron with intense dc Ar-ion plating at low temperatures ~,70 °C!. The ratio of the argon ion flux to neutral carbon flux F i/Fn is about 5. The film density and compressive stress are found to pass through a maximum of 2.7 g/cm and 16 GPa, respectively, at an ion pla...
متن کاملAdsorption Properties of Nickel-based Magnetic Activated Carbon Prepared by Pd-free Electroless Plating
Nickel-based magnetic activated carbon was synthesized from coconut shell activated carbon by electroless plating with palladium-free activation. The effect of plating solution volume on metallic ratio and adsorption capacity were evaluated. The effect of metallic ratio on specific area, pore volume, and magnetic properties were investigated. The morphologies of activated carbon before and afte...
متن کاملNi-B Coating Production on Magnesium Alloy by Electroless Deposition
The use of magnesium alloys is limited due to their susceptibility to corrosion although they have many attractive physical and mechanical properties. To increase mechanical and corrosion properties of these alloys, many deposition method and coating types are used. Electroless Ni–B coatings have received considerable interest recently due to its unique properties such as cost-effectiveness, th...
متن کاملThe Root Cause of Black Pad Failure of Solder Joints with Electroless Ni/Immersion Gold Plating
This paper reports on a study of the reaction of solder with the electrolessnickel with immersion gold (ENIG) plating system, and the resulting interfacial structures. A focused-ion beam (FIB) was used to polish the cross sections to reveal details of the microstructure of the ENIGplated pad with and without soldering. High-speed pull testing of solder joints was performed to expose the pad sur...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Institute of Metals and Materials
سال: 1983
ISSN: 0021-4876,1880-6880
DOI: 10.2320/jinstmet1952.47.3_175