Lateral response of rigid monopiles subjected to cyclic loading: centrifuge modelling
نویسندگان
چکیده
In this study, a total number of 20 centrifuge tests were carried out to investigate monopile behaviour under lateral cyclic loading. The instrumented model pile simulates an offshore wind turbine foundation with embedment ratio 5 installed in sand layers two relative densities 80% and 50%. influence the directional characteristic amplitude load on was studied. data analysis focused accumulation displacement evolution secant stiffness system. most damaging type (which can cause accumulated displacement) is identified as two-way loading, it observed that always increases stiffness. A new for prediction change has been formulated. An example procedure developed presented typical field subjected Lastly, performance demonstrated predicted results are compared test data.
منابع مشابه
Centrifuge modelling of long piles subjected to lateral loading with high load eccentricity in sand
In this research paper, five centrifuge lateral loading tests of long piles with a considerable load eccentricity were carried out in the sand to investigate the impacts of the load eccentricity and pile length changes on the lateral behavior of a flexible pile beside the determination of experimental p-y curves. Comparing experimental test results with the recommended API (American Petroleum ...
متن کاملComparison of Cyclic P-y Methods for Offshore Wind Turbine Monopiles Subjected to Extreme Storm Loading
Approximately 75% of installed offshore wind turbines (OWTs) are supported by monopiles, a foundation whose design is dominated by lateral loading. Monopiles are typically designed using the p-y method which models soil-pile resistance using decoupled, nonlinear elastic Winkler springs. Because cyclic soil behavior is difficult to predict, the cyclic py method accounts for cyclic soil-pile inte...
متن کاملConcrete Filled Tubular Bracing Subjected to Cyclic Loading
The energy absorption of concrete filled, hollow-steel bracing was analyzed respect to geometric and mechanical parameters including the width-to-thickness section ratio, slenderness level, and strength of the steel and concrete. Local buckling and ductility were also investigated with respect to variation in the cross-section. The infill increased the compression resistance, even after multipl...
متن کاملModelling of Random Geometrical Imperfections and Reliability Calculations for Thin Cylindrical Shell Subjected to Lateral Pressure
It is well known that it is very difficult to manufacture perfect thin cylindrical shell. Initial geometrical imperfections existing in the shell structure is one of the main determining factor for load bearing capacity of thin cylindrical shell under uniform lateral pressure. As these imperfections are random, the strength of same size cylindrical shell will also random and a statistical metho...
متن کاملThe Effect of Lateral Loading Parameters on Monopile Behavior Based on Physical Modeling
Monopiles are the most common type of foundation for offshore wind turbines (OWT). Monopiles have been used in more than 80% of the offshore wind turbines. A monopile will be affected by millions of lateral load cycles during the operating period, which will cause its rotation and lateral deformation. The rotation and the deformation are dependent on the soil properties, monopile specification,...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Proceedings of the Institution of Civil Engineers
سال: 2022
ISSN: ['1757-9430', '1757-9449']
DOI: https://doi.org/10.1680/jgeen.20.00088