Lateral effective thermal conductivity in a fluidized bed with horizontal multi-tube internals.
نویسندگان
چکیده
منابع مشابه
Continuous Fluidized Bed Drying With and Without Internals: Kinetic Model
Spirals as internals are utilized to reduce the axial mixing of solids in fluidized beds, by routing the solids flow in a predetermined route or by localizing the solids mixing. The drying kinetics of continuous fluidized bed with and without internals has been compared and modeled using batch drying kinetics and residence time distribution analysis. The batch drying experiments were conducted ...
متن کاملInvestigation of a Cold Model of Internally Circulating Fluidized Bed with Draft Tube to be used as a two-Zone Fluidized Bed Reactor
In this research, a cold model of internally circulating fluidized bed is investigated. The aim is to find the effects of some of the operating parameters on the performance of the reactor. Experiments were carried out in a glass column (30 mm i.d. and 25 cm height) with a centrally located draft tube (11 mm i.d. and 5 or 7 cm height). The bed was loaded with white silica particles (dp = 0.15 -...
متن کاملExperimental Investigation of the Alumina/Paraffin Thermal Conductivity Nanofluids with a New Correlated Equation on Effective Thermal Conductivity
Liquid paraffin as a coolant fluid can be applied in electronic devices as a result to its suitable capabilities such as electrical insulating, high heat capacity, chemical and thermal stability, and high boiling point. However, the poor thermal conductivity of paraffin has been confined its thermal cooling application. Addition of high conductor nanoparticles to paraffin can fix this drawback...
متن کاملEffective Thermal Conductivity of Graded Nanocomposites with Interfacial Thermal Resistance
This work employs the self-consistent method to investigate the effective thermal conductivity distribution in functionally graded materials (FGMs) considering the Kapitza interfacial thermal resistance. A heat conduction solution is first derived for one spherical particle embedded in a graded matrix with a prefect interface. The interfacial thermal resistance of a nanoparticle is simulated by...
متن کاملEffective thermal conductivity in thermoelectric materials
Thermoelectric generators (TEGs) are solid state heat engines that generate electricity from a temperature gradient. Optimizing these devices for maximum power production can be difficult due to the many heat transport mechanisms occurring simultaneously within the TEG. In this paper, we develop a model for heat transport in thermoelectric materials in which an " effective thermal conductivity ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: JOURNAL OF CHEMICAL ENGINEERING OF JAPAN
سال: 1982
ISSN: 0021-9592,1881-1299
DOI: 10.1252/jcej.15.39