LATERAL DISPERSION OF SOLID IN FLUIDIZED BEDS
نویسندگان
چکیده
منابع مشابه
Pressure Drop in Liquid-Solid Circulating Fluidized Beds
An experiment was conducted to obtain data of pressure drop in riser tubes of liquid-solid circulating fluidized beds. In the experiment, 2 kinds of riser tube having a diameter of 24mm and 36mm were used. Tested particles were of glass and ceramics, and their diameter range was from 2.10 to 4.95mm. Water at ambient conditions was used as the fluidizing fluid. Pressure drop in riser tubes was m...
متن کاملHeat Transfer Mechanisms in a Gas – Liquid-Solid Fluidized Beds
Three-Phase Fluidized Beds have found an important place in processing technology as Reactors. Gas-Liquid-Solid fluidization is considered in the present paper as operating bed of fluidized solid particles simultaneously with co-current upward flow of a continuous liquid phase and a gaseous phase dispersed in the form of bubbles. In the present study, the experimental work of the author on heat...
متن کاملHybrid Two-Fluid DEM Simulation of Gas-Solid Fluidized Beds
Simulations of gas-solid fluidized beds have been performed using a hybrid simulation method, which couples the discrete element method (DEM) for particle dynamics with the averaged two-fluid (TF) continuum equations for the gas phase. The coupling between the two phases is modeled using an interphase momentum transfer term. The results of the hybrid TF-DEM simulations are compared to experimen...
متن کاملSegregation Behaviour of Particles in Gas Solid Fluidized Beds at Elevated Pressure
A comprehensive mathematical model based on the discrete particle model and computational fluid dynamics was utilized to investigate mixing and segregation of particles in fluidized beds at high pressure. To quantify the extent of mixing in the bed, the Lacey mixing index was used. Simulations were carried out with different mass fractions of small particles at various pressures ranging from 1 ...
متن کاملFlow through Packed Beds and Fluidized Beds
Chemical engineering operations commonly involve the use of packed and fluidized beds. These are devices in which a large surface area for contact between a liquid and a gas (absorption, distillation) or a solid and a gas or liquid (adsorption, catalysis) is obtained for achieving rapid mass and heat transfer, and particularly in the case of fluidized beds, catalytic chemical reactions. You wil...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: JOURNAL OF CHEMICAL ENGINEERING OF JAPAN
سال: 1969
ISSN: 0021-9592,1881-1299
DOI: 10.1252/jcej.2.122