Lateral and Chemical Force Microscopy Mapping Surface Friction and Adhesion
نویسندگان
چکیده
منابع مشابه
Adhesion force mapping on wood by atomic force microscopy: influence of surface roughness and tip geometry
This study attempts to address the interpretation of atomic force microscopy (AFM) adhesion force measurements conducted on the heterogeneous rough surface of wood and natural fibre materials. The influences of wood surface roughness, tip geometry and wear on the adhesion force distribution are examined by cyclic measurements conducted on wood surface under dry inert conditions. It was found th...
متن کاملNon-contact Friction Force Microscopy Exploiting Lateral Resonance Enhancement
A method for sensing the dissipation occurring when a sharp atomic force microscopy (AFM) tip is oscillated laterally above a surface at distances typical of non-contact mode AFM operation is established and demonstrated. Dissipation is detected by measuring the damping of lateral resonant modes of the AFM cantilever, excited independently after the lateral resonant mode identification, when th...
متن کاملLateral Force Microscopy Study of the Friction between Silica Surfaces.
The friction between a single silica glass sphere and a flat silica glass surface has been investigated using lateral force microscopy. Two types of silica surface were investigated, one fully hydroxylated and the other partially dehydroxlated. These samples have markedly different wetting properties and are known as hydrophilic and hydrophobic silica, respectively. The lateral friction force a...
متن کاملRapid communication Influence of ultrasonic surface acoustic waves on local friction studied by lateral force microscopy
We studied dynamic friction phenomena introduced by ultrasonic surface acoustic waves using a scanning force microscope in the lateral force mode and a scanning acoustic force microscope. An effect of friction reduction was found when applying surface acoustic waves to the micromechanical tip-sample contact. Employing standing acoustic wave fields, the wave amplitude dependent friction variatio...
متن کاملCompositional mapping of semiconductor structures by friction force microscopy
Topographic and chemical mapping of materials at high resolution define the goals of a microscope. Force microscopy can provide methods for simultaneous topography and chemical characterization of materials. Here we describe the use of the atomic force microscope to map chemical variations of semiconductor samples. Chemical maps of semiconductor InP/InGaAs alloys have been determined with 3 nm ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Microscopy Today
سال: 1995
ISSN: 1551-9295,2150-3583
DOI: 10.1017/s1551929500065809