Laser Welding of Automotive Transmission Components
نویسندگان
چکیده
منابع مشابه
Laser welding of modern automotive high strength steels
The paper demonstrates the correlation between the chemical composition of steel grades and the hardness as well as the formability of laser welds generated with modern automotive high strength steel grades. At the very low heat input of industrial laser welding and the resulting extremely high cooling rate, the weld hardness is fully controlled by the carbon content of the base materials and n...
متن کاملTask Sequencing for Remote Laser Welding in the Automotive Industry
This paper proposes a new model and algorithm for task sequencing in remote laser welding in the automotive industry. It is shown that task sequencing (in which order to weld the seams) is strongly related to path planning (how the welding robot should move), therefore the two problems must be solved together, in an integrated way. The problem is modeled as a direct product of a traveling sales...
متن کاملInvestigation on the Mechanism and Failure Mode of Laser Transmission Spot Welding Using PMMA Material for the Automotive Industry
To satisfy the need of polymer connection in lightweight automobiles, a study on laser transmission spot welding using polymethyl methacrylate (PMMA) is conducted by using an Nd:YAG pulse laser. The influence of three variables, namely peak voltages, defocusing distances and the welding type (type I (pulse frequency and the duration is 25 Hz, 0.6 s) and type II (pulse frequency and the duration...
متن کاملLaser transmission welding of transparent plastics parts in micro technology
Most welding processes for plastics do not meet the special demands of micro technology. Laser transmission welding, however, features distinctive advantages like low mechanical and thermal load of the joining parts. Hence it is particularly suitable for the welding of micro plastics parts. Certain optical properties of the components to be welded are needed though. While one of the welding par...
متن کاملBridging Gaps in Laser Transmission Welding of Thermoplastics
Gaps at part interfaces pose a major challenge for laser transmission welding (LTW) of thermoplastics due to the reliance on contact conduction between the absorptive and transmissive parts. In industrial applications, gaps between parts can occur for a variety of tolerance and process control reasons. Previous experimental and modeling work in LTW has focused on gap-free joints, with little at...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Korean Welding and Joining Society
سال: 2011
ISSN: 1225-6153
DOI: 10.5781/kwjs.2011.29.6.665