Laser Transformation Hardening and Laser Alloying
نویسندگان
چکیده
منابع مشابه
Evaluating Wear Properties of AISI 420 Martensitic Stainless Steel after Laser Transformation Hardening
As the turbine industries need to manufacture turbine blades made of martensitic stainless steel AISI 420 with high toughness and wear resistance, local laser hardening has become more and more important. In this research, surface of the samples was initially hardened by high-power pulsed laser beam; then, optimum parameters of hardening were calculated and wear resistance of surface hardened s...
متن کاملOptimization of Laser Beam Transformation Hardening by One Single Parameter
The process of laser beam transformation hardening is principally controlled by two independent parameters, the absorbed laser power on a given area and the interaction time. These parameters can be transformed into two functional parameters: the maximum surface temperature and the hardening depth. It has been proved that with a constant hardening depth the results (hardness. residual stress. e...
متن کاملOptimal control of laser hardening
We present a mathematical model for the laser surface hardening of steel. It consists of a nonlinear heat equation coupled with a system of ve ordinary diierential equations to describe the volume fractions of the occuring phases. Existence, regularity and stability results are discussed. Since the resulting hardness can be estimated by the volume fraction of martens-ite, we formulate the probl...
متن کاملThermal Analysis of Laser Hardening for Different Moving Patterns
Transient thermal field in laser surface hardening treatment of medium carbon steel was analyzed by employing both three-dimensional analytical model and finite element model. In finite element model the laser beam was considered as a moving plane heat flux to establish the temperature rise distribution in the work-piece, while in analytical model laser beam was considered as an internal heat s...
متن کاملExperimental Studies on the Microstructure and Hardness of Laser Transformation Hardening of Low Alloy Steel
An experimental investigation with Nd:YAG laser system was carried out to study the effects of laser hardening process parameters on the microstructure and hardness during laser hardening of EN25 steel. The laser beam is allowed to scan on the surface of the work piece by varying the laser beam power (750–1250 W) and travel speed (500–1000 mm/min) of the work table. The microstructural features...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Smart Processing
سال: 2012
ISSN: 2186-702X
DOI: 10.7791/jspmee.1.262