Laser surface texturing of tool steel: textured surfaces quality evaluation
نویسندگان
چکیده
منابع مشابه
Laser Grooving of Surface Cracks on Hot Work Tool Steel
Repair welding (RW) with wire cladding is a common procedure to extend the in-service life of heavily loaded tool parts for die and mould industries 1-5 . The main advantages of repair welding are short downtime and cost efficiency compared to production of new tool part. Repair welding in general lowers the tool cost in the final part and enables higher added value to the die casting and injec...
متن کاملRobust and Easy to Use Quality Control of Roughness on Milled Tool Steel Surfaces Robust and Easy to Use Quality Control of Roughness on Milled Tool Steel Surfaces
This study was an evaluation of measuring strategies using a handheld 2D profiler for quality control of finish milled tool steel with regard to surface roughness. A selection of ball nose end mills in combination with two different tool steels (hardness 39 and 47 HRC) were used to manufacture the surfaces that were to be measured. It was found that using an appropriate measuring strategy it is...
متن کاملLaser Surface Texturing of Polymers for Biomedical Applications
Polymers are materials widely used in biomedical science because of their biocompatibility, and good mechanical properties (which, in some cases, are similar to those of human tissues); however, these materials are, in general, chemically and biologically inert. Surface characteristics, such as topography (at the macro-, micro, and nano-scale), surface chemistry, surface energy, charge, or wett...
متن کاملSurface micro- and nano-texturing of stainless steel by femtosecond laser for the control of cell migration
The precise control over the interaction between cells and the surface of materials plays a crucial role in optimizing the integration of implanted biomaterials. In this regard, material surface with controlled topographic features at the micro- and nano-scales has been proved to affect the overall cell behavior and therefore the final osseointegration of implants. Within this context, femtosec...
متن کاملLaser Textured Surfaces for Mixed Lubrication: Influence of Aspect Ratio, Textured Area and Dimple Arrangement
Unidirectional sliding experiments with polished and laser textured steel surfaces were carried out to investigate the effects of different textured area densities, aspect ratios and dimple arrangements. The system was lubricated with Polyalphaolefin (PAO) at 100 °C and the contact pressure was 3 MPa. For measuring Stribeck curves, the sliding speed was controlled between 40 and 2000 mm/s. The ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Open Engineering
سال: 2016
ISSN: 2391-5439
DOI: 10.1515/eng-2016-0012