LASER SURFACE ALLOYING OF A MILD STEEL FOR CORROSION RESISTANCE IMPROVEMENT

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Corrosion Inhibition of Sodium Phosphate for Coarse and Near Ultrafined-Grain Mild steel surface

An ultrafine grain surface layer with average crystallite size of 28 nm was produced on annealed mild steel through a wire brushing process. The effects of grain size reduction on the inhibition performance of sodium phosphate were investigated using polarization and electrochemical impedance spectroscopy (EIS) measurements. The crystal grain size of wire brushed surface was analyzed by X-ray d...

متن کامل

Influence of laser marking on stainless steel surface and corrosion resistance

Laser marking is the modern industrial application for non-contact surface modification. An incidence of a laser beam on the marked surface causes material and structural changes, which lead to optical changes of the surface. The processes during the laser-surface interaction can also affect other surface properties, especially corrosion properties in the case of stainless steel. Laser marking ...

متن کامل

Controlling the Mechanical Properties and Corrosion Resistance of Mild Steel by Intercritical Annealing and Subcritical Tempering

The effects of intercritical annealing and subcritical tempering on the mechanical properties and corrosion resistance of mild steel were studied. It was revealed that intercritical annealing followed by quenching resulted in the development of a ferritic-martensitic dual phase (DP) microstructure with high tensile strength, disappearance of the yield-point phenomenon, superior work-hardening b...

متن کامل

Oxidation resistance of plasma coated and laser treated mild steel

Stainless steel powder was coated on mild steel substrate using plasma coating. The porous coating thus obtained was modified using laser irradiation. The oxidation behaviour of the plasma coated as well as laser treated material was studied in air at 1073 K. There was considerable decrease in oxidation rate of mild steel after plasma coating as expected. In addition the oxidation resistance im...

متن کامل

Inhibitive Assesment of Stearamide as a Corrosion Inhibitor for Mild Steel in HCl Solution

In this study effect of Stearamide as a corrosion inhibitor for mild steel in hydrochloric acid media was investigated employing various electrochemical techniques include potentiodynamic polarization, electrochemical impedance spectroscopy (EIS) and liner polarization resistance (LPR). In view of the fact that Stearamide is an insoluble compound in water, its inhibitive effect was examined by ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Le Journal de Physique IV

سال: 1991

ISSN: 1155-4339

DOI: 10.1051/jp4:1991715