Laser sintering and post-processing of a walnut shell/Co-PES composite
نویسندگان
چکیده
منابع مشابه
Laser Sintering Model for Composite Materials
A computer model for the sintering of ceramic/polymer composite materials has been established based on empirical sintering rate data. The model calculates sintering depths which result from variations in the operating parameters which include laser power, beam speed, scan spacing, scan vector length, and initial temperatures of the powder and surroundings. Sintering depths measured in multiple...
متن کاملStudy on the Ingredient Proportions and After-Treatment of Laser Sintering Walnut Shell Composites
To alleviate resource shortage, reduce the cost of materials consumption and the pollution of agricultural and forestry waste, walnut shell composites (WSPC) consisting of walnut shell as additive and copolyester hot melt adhesive (Co-PES) as binder was developed as the feedstock of selective laser sintering (SLS). WSPC parts with different ingredient proportions were fabricated by SLS and proc...
متن کاملa comparative move analysis of the introduction sections of ma theses by iranian and native post-graduate students
since esp received universal attention to smooth the path for academic studies and productions, a great deal of research and studies have been directed towards this area. swales’ (1990) model of ra introduction move analysis has served a pioneering role of guiding many relevant studies and has proven to be productive in terms of helpful guidelines that are the outcome of voluminous productions ...
15 صفحه اولDirect Laser Sintering of Ceramics
For more than one decade layer manufacturing technologies assist the development of new products. Due to a layer-wise build-up of a three-dimensional geometry, nearly every complex design is producible in a short period of time. Selective Laser Sintering is a powderbased technique to produce plastic prototypes (Rapid Prototyping) or metal mould inserts (Rapid Tooling). The laser sintering of ce...
متن کاملStudy on the microstructure and binding mechanisms of Selective laser sintered wood plastic composite
A new type of wood plastic composite, Eucalyptus/PES(Polyethersulfone) blend, was developed. It was designed to be used in LS (Laser Sintering) with reduced energy usage with cost savings. The preparation of Eucalyptus/PES blend and part sintering were under fixed processing conditions and parameters. Through mechanical testing, it was discovered that the strength of prototypes is low due to th...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: RSC Advances
سال: 2017
ISSN: 2046-2069
DOI: 10.1039/c7ra00775b