منابع مشابه
Femtosecond Laser Processing of Nitinol
The effects of femtosecond laser machining on surface characteristics and subsurface microstructure of a Nitinol alloy were studied. The femtosecond laser machining produced an average surface roughness of 0.2 μm. A re-deposited layer of 7 μm and a hardened layer of 70 μm were also resulted from the machining.
متن کاملSpectroscopic diagnostics of plasma during laser processing
The role of the plasma in laser–metal interaction is of considerable interest due to its influence in the energy transfer mechanism in industrial laser materials processing. A 10 kW CO2 laser was used to study its interaction with aluminium under an argon environment. The objective was to determine the absorption and refraction of the laser beam through the plasma during the processing of alumi...
متن کاملNonminimum Phase Behavior of Laser Material Processing
Optical sensors are increasingly applied in laser material processing to monitor and control the lasermaterial interaction zone. Dynamic models, relating the sensor signals (e.g. as temperature or molten area) to the process inputs (e.g. laser power or beam velocity), provide the basis for the design and tuning of a feedback controller. These models can show nonminimum phase (NMP) behavior. Thi...
متن کاملAdaptive Optics Control for Laser Material Processing
An adaptive optics system is used for correcting tip-tilt disturbances in an experimental laser material processing setup. The proposed tip-tilt controller is based on PI-controllers that are fed with disturbance estimates from a Kalmanfilter. In addition, delays due to wavefront computation in the wavefront sensor and from data transmission are taken into account in the loop-shaping design. La...
متن کاملLaser Beam Analysis Using Image Processing
The laser beam profiles captured by CCD camera processed and analyzed by using 2Dgraphic and displayed on the monitor. The analysis of the He-Ne profiles and laser diode profiles are presented. The results showed that the He-Ne laser emits a pure Gaussian beam, whereas the diode laser emits an elliptical beam shape. The laser beam profile analysis developed to study the intensity distribution, ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Welding Society
سال: 1965
ISSN: 0021-4787,1883-7204
DOI: 10.2207/qjjws1943.34.16