Laser processing of sintered powdered SPN14A7M5 steel
نویسندگان
چکیده
منابع مشابه
Laser heating of a sintered oxide superconductor
Raman spectroscopy, in which a laser beam serves the dual role of exciting the Raman spectrum and annealing the sample, shows promise as a means of investigating oxygen effects in the oxide superconductors. A technique is described, based on measurements of the ratios of the areas of corresponding peaks in the antiStokes and Stokes spectra, whereby the temperature of the illuminated region of t...
متن کاملCharacterization of porosity of isostatically pressed and sintered nickel-base powdered metal.
Characterization of the pore structure of compacted and sintered parts made from a nickel-base powder was accomplished using the mercury porosimetry method. The theoretical density values for the sintered specimens varied from 56.3 to 96.7% which corresponds to a porosity of 43.7 to 3.3%. A maximum interconnecting median pore diameter of 21 mum resulted from a -80/+200 mesh powder compacted at ...
متن کاملInvestigation of the Effect of Atmosphere on the Pores of Sintered Astaloy CrM Steel
Abstract Image analysis is used to study the effect of sintering atmosphere and sintering times on the pores morphology of Astaloy CrM. The pores morphology was described by means of some parameters, Circular Diameter (DC)- which shows the diameter of equivalent circle for comparing the pore size, FElongation and FShape- which have different geometrical meanings. The results have been interpret...
متن کاملA STUDY ON WEAR RATES OF 100Cr6 STEEL RUNNING AGAINST SINTERED STEEL SURFACES UNDER DRY AND STARVED LUBRICATION
This paper investigates the tribological behavior of 100Cr6 steel pin running against sintered steel bearing material used in hermetic compressors. Tests were conducted under dry and starved lubrication sliding conditions in air at room temperature. Although porous structure acts as crack initiation sites thus limiting the wear resistance of sintered iron in dry sliding conditions under high co...
متن کاملcontrol of the optical properties of nanoparticles by laser fields
در این پایان نامه، درهمتنیدگی بین یک سیستم نقطه کوانتومی دوگانه(مولکول نقطه کوانتومی) و میدان مورد مطالعه قرار گرفته است. از آنتروپی ون نیومن به عنوان ابزاری برای بررسی درهمتنیدگی بین اتم و میدان استفاده شده و تاثیر پارامترهای مختلف، نظیر تونل زنی(که توسط تغییر ولتاژ ایجاد می شود)، شدت میدان و نسبت دو گسیل خودبخودی بر رفتار درجه درهمتنیدگی سیستم بررسی شده اشت.با تغییر هر یک از این پارامترها، در...
15 صفحه اولذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Izvestiya Vuzov. Poroshkovaya Metallurgiya i Funktsional’nye Pokrytiya (Proceedings of Higher Schools. Powder Metallurgy аnd Functional Coatings)
سال: 2015
ISSN: 1997-308X
DOI: 10.17073/1997-308x-2013-2-19-25