Laser induced graphitization of PAN-based carbon fibers
نویسندگان
چکیده
منابع مشابه
Femtosecond laser-induced surface structures on carbon fibers.
The influence of different polarization states during the generation of periodic nanostructures on the surface of carbon fibers was investigated using a femtosecond laser with a pulse duration τ=300 fs, a wavelength λ=1025 nm, and a peak fluence F=4 J/cm². It was shown that linear polarization results in a well-aligned periodic pattern with different orders of magnitude concerning their peri...
متن کاملFABRICATION OF CARBON FIBERS FROM COMMERCIAL WET SPIN POLYACRYLONITRILE FIBERS
Carbon fibers are fabricated from different materials such as special polyacrylonitrile (PAN) fibers, cellulose fibers and pitch. But PAN fibers are recognized as the most widely used precursor for the present-day manufacture of carbon fibers. The process of fabrication carbon fibers from special PAN fibers is composed of two steps including oxidative stabilization at low temperature and carbon...
متن کاملStrengthened PAN-based carbon fibers obtained by slow heating rate carbonization.
Large efforts have been made over the last 40 years to increase the mechanical strength of polyacrylonitrile (PAN)-based carbon fibers (CFs) using a variety of chemical or physical protocols. In this paper, we report a new method to increase CFs mechanical strength using a slow heating rate during the carbonization process. This new approach increases both the carbon sp(3) bonding and the numbe...
متن کاملLaser-induced graphitization of colloidal nanodiamonds for excellent oxygen reduction reaction.
Graphitized nanodiamonds were conveniently prepared by the laser irradiation of colloidal solution using various solvents. The nanodiamonds were converted into a fully graphitized onion-like structure, which became a cage-like mesoporous structure by the degradation of graphitic layers. Alcohols, acetone, and acetonitrile are more efficient solvents for the graphitization compared to water and ...
متن کاملUsing Molecular Dynamics to Assess Mechanical Properties of PAN-Based Carbon Fibers Comprising Imperfect Crystals with Amorphous Structures
We constructed an atomic structure model for a PANbased carbon fiber containing amorphous structures using molecular dynamics methods. It was found that basic physical properties such as crystallinity, Young’s modulus, and thermal conductivity of our model were nearly identical to those of real carbon fibers. We then obtained the tensile strength of a carbon fiber, which has no macro defects. W...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: RSC Advances
سال: 2018
ISSN: 2046-2069
DOI: 10.1039/c8ra00497h