Laser Corrosion of TiN-TiB2 Ceramics

نویسندگان

چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Microstructure of spark plasma sintered TiB2 and TiB2–AlN ceramics

In this research study, the effects of aluminum nitride (AlN) additive on the densification behavior and microstructure development of titanium diboride (TiB2) based ceramic matrix composite were investigated. In this way, a monolithic TiB2 ceramic and a TiB2–5 wt% AlN ultrahigh temperature ceramic composite were fabricated by spark plasma sintering (SPS) proces...

متن کامل

In situ controlled rapid growth of novel high activity TiB2/(TiB2–TiN) hierarchical/heterostructured nanocomposites

In this work, a reaction coupling self-propagating high-temperature synthesis (RC-SHS) method was developed for the in situ controlled synthesis of novel, high activity TiB2/(TiB2-TiN) hierarchical/heterostructured nanocomposites using TiO2, Mg, B2O3, KBH4 and NH4NO3 as raw materials. The as-synthesized samples were characterized using X-ray diffraction (XRD), scanning electron microscope (SEM)...

متن کامل

Fretting corrosion of tin-plated contacts

The susceptibility of tin-plated contacts to fretting corrosion is a major limitation for its use in electrical connectors. The present paper evaluates the influence of a variety of factors, such as, fretting amplitude (track length), frequency, temperature, humidity, normal load and current load on the fretting corrosion behaviour of tin-plated contacts. This paper also addresses the developme...

متن کامل

Direct Laser Sintering of Ceramics

For more than one decade layer manufacturing technologies assist the development of new products. Due to a layer-wise build-up of a three-dimensional geometry, nearly every complex design is producible in a short period of time. Selective Laser Sintering is a powderbased technique to produce plastic prototypes (Rapid Prototyping) or metal mould inserts (Rapid Tooling). The laser sintering of ce...

متن کامل

Research about the Porous Ceramics of Al2O3-TiB2 System by SHS Method

Porous ceramics composite was prepared with mixed powders (Al, TiO2 and B2O3) by SHS (Self-propagating High-temperature Synthesis) method. The effects of the particle size of aluminum power, the additives of SiC and the compacting pressure on the product properties and the pore size, as well as the combustion process in the Al2O3-TiB2 system were researched. The effects of all factors on proper...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Research & Development in Material Science

سال: 2019

ISSN: 2576-8840

DOI: 10.31031/rdms.2019.10.000731