Laser clad ZrO2Y2O3 ceramic/Ni-base alloy composite coatings
نویسندگان
چکیده
منابع مشابه
Effects of Laser Power Level on Microstructural Properties and Phase Composition of Laser-Clad Fluorapatite/Zirconia Composite Coatings on Ti6Al4V Substrates
Hydroxyapatite (HA) is one of the most commonly used materials for the coating of bioceramic titanium (Ti) alloys. However, HA has poor mechanical properties and a low bonding strength. Accordingly, the present study replaces HA with a composite coating material consisting of fluorapatite (FA) and 20 wt % yttria (3 mol %) stabilized zirconia (ZrO₂, 3Y-TZP). The FA/ZrO₂ coatings are deposited on...
متن کاملMicrostructure and Wear Resistance of Laser-Clad (Co, Ni)61.2B26.2Si7.8Ta4.8 Coatings
Key Laboratory of Materials Modification by Laser, Ion and Electron Beams (Ministry of Education), School of Materials Science and Engineering, Dalian University of Technology, Dalian 116024, China; [email protected] (L.Z.); [email protected] (S.Q.); [email protected] (Q.Y.) * Correspondence: [email protected] (C.W.); [email protected] (C.D.); Tel.: +86-0411-8470-8449 (C.W.)...
متن کاملSLURRY EROSION RESISTANCE OF LASER CLAD Fe–Cr–B–Si COATINGS
The slurry erosion behaviour of laser clad Fe–Cr–B–Si alloy coatings was investigated at impact angles from 30u to 90u with an increment of 15u, and compared with the slurry erosion behaviour of two laser clad carbide coatings and a non-coated substrate made of AISI 4140 steel. The Fe–Cr–B–Si alloy coatings had slurry erosion resistance. Their overall slurry erosion resistance at impact angles ...
متن کاملSilver-clad nitride semiconductor laser diode
An edge-emitting laser diode is described in which the epitaxial upper cladding layer is replaced with a metal contact selected for its optical as well as electrical properties. The structure is demonstrated with an In0.1Ga0.9N multiple-quantum-well laser diode operating at 412 nm with silver rather than the typical p-type AlGaN for the upper cladding. Silver is effective as a cladding layer be...
متن کاملOxidation Performance of Platinum-Clad Mo-47Re Alloy
The alloy Mo-47Re has favorable mechanical properties at temperatures above 1400 C, but it undergoes severe oxidation when used in air with no protective coating. To shield the alloy from oxidation, platinum cladding has been evaluated. The unprotected alloy undergoes catastrophic oxidation under static and dynamic oxidation conditions. The platinum cladding provides good protection from static...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Ceramics International
سال: 1995
ISSN: 0272-8842
DOI: 10.1016/0272-8842(95)95884-k