LASER ALLOYING OF TITANIUM ALLOYS WITH B AND TiB2

Laser Forming of Titanium and Its Alloys – An Overview

Laser beam forming is a novel technique developed for the joining of metallic components. In this study, an overview of the laser beam forming process, areas of application, the basic mechanisms of the laser beam forming process, some recent research studies and the need to focus more research effort on improving the laser-material interaction of laser beam forming of titanium and its alloys ar...

Laser Welding of Titanium and Dental Precious Alloys

The performance of laser welding of Ti and two dental precious alloys (Ag-Pd-Au, Au-Pt-Ag) was investigated by mechanical testing and microscopic observation, using butt joint as design. The laser irradiation was done using a commercial Nd:YAG dental laser-welding device in a single pulse mode with output currents 150, 200, 250, 300A, spot diameters 0.6, 0.9, 1.2mm, and pulse duration 10ms. The...

Titanium Alloys

Although originally discovered in the 18th century [1], the titanium industry did not experience any significant advancement until the middle of the 20th century through the development of the gas turbine engine [2]. Since then, the aerospace sector has dominated worldwide titanium use with applications in both engines and airframe structures [3]. The highly desirable combination of properties,...

Titanium and Titanium Alloys as Biomaterials

Application of laser surface alloying for improvement of wear resistance of bearing steels working at severe conditions and of light titanium alloys

The task of wear resistance improvement for bearing steels working at high loads in water medium was solved by laser alloying with Sn. The modified zone contains up t o 22 wt.% Sn, which is used as a solid lubricant during exploitation. As a result the bearing race's durability is increased 2.5 times. The combination of laser alloying from a nitrogen jet with surface plastic deformation (SPD) w...