Large-scale formation of shish-kebab in water-assisted injection-moulded high-density polyethylene with a high-molecular weight

simulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water

abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...

Synthesis of high molecular weight polyethylene using FI catalyst

A FI Zr-based catalyst of bis[N-(3,5-dicumylsalicylidene)-2′,6′­diisopropylanilinato]zirconium(IV) dichloride was prepared and used for polymerization of ethylene. The effects of reaction conditions on the polymerization were examined in detail. The increase in ethylene pressure and rise in polymerization temperature up to 35 oC were favorable for catalyst/MAO to raise the catalytic activity as...

Molecular basis of the shish-kebab morphology in polymer crystallization.

In the rich and long-standing literature on the flow-induced formation of oriented precursors to polymer crystallization, it is often asserted that the longest, most extended chains are the dominant molecular species in the "shish" of the "shish-kebab" formation. We performed a critical examination of this widely held view, using deuterium labeling to distinguish different chain lengths within ...

Wear of Ultra High Molecular Weight Polyethylene

synthesis of high molecular weight polyethylene using fi catalyst

a fi zr-based catalyst of bis[n-(3,5-dicumylsalicylidene)-2′,6′­diisopropylanilinato]zirconium(iv) dichloride was prepared and used for polymerization of ethylene. the effects of reaction conditions on the polymerization were examined in detail. the increase in ethylene pressure and rise in polymerization temperature up to 35 oc were favorable for catalyst/mao to raise the catalytic activity as...