Large PDP Fabrication Process and Glass Substrates.
نویسندگان
چکیده
منابع مشابه
Fabrication, Characterization and Process Parameters Optimization of Electrospun 58S Bioactive Glass Submicron Fibers
Over the past decades, bioactive glass (BG) has been of a great interest in the bone regeneration field, due to its excellent biocompatibility, bioactivity and osteoconductivity. Herein, fabrication of bioactive glass as one-dimensional fibers by employing an Electrospinning process is reported. The Sol-Gel method was chosen considering the final fibers smoothness and homogeneity. Starting sol ...
متن کاملLarge magnetoresistance of bismuthÕgold films thermally deposited onto glass substrates
Bismuth thin films deposited onto glass substrates by thermal sublimation are polycrystalline with short mean free paths, multiple grain orientations, and disappointingly small magnetoresistance when compared to single crystals. Direct deposition onto thin gold buffer layers followed by a post-deposition anneal leads to significantly improved properties, namely, large grains oriented in the tri...
متن کاملDevelopment of Defect Inspection System for PDP ITO Patterned Glass
The formation degree of sustain (ITO pattern) determines the quality of a PDP (Plasma Display Panel). Thus, in the present study, we attempt to detect 100% of the defects that are larger than 30μm. Currently, the inspection method in the PDP manufacturing process is dependent upon the naked eye or a microscope in off-line mode. In this study, a prototype inspection system for PDP ITO patterned ...
متن کاملFabrication and Deformation of Metallic Glass MicroLattices
Recent progress in microand nanofabrication techniques enables the creation of hierarchically architected microlattices with dimensional control over six orders of magnitude, from centimeters down to nanometers. This hierarchical control facilitates the exploration of opportunities to exploit nano-sized material effects in structural materials. In this work, we present the fabrication, characte...
متن کاملNb 9-Layer Fabrication Process for Superconducting Large-Scale SFQ Circuits and Its Process Evaluation
We describe the recent progress on a Nb nine-layer fabrication process for large-scale single flux quantum (SFQ) circuits. A device fabricated in this process is composed of an active layer including Josephson junctions (JJ) at the top, passive transmission line (PTL) layers in the middle, and a DC power layer at the bottom. We describe the process conditions and the fabrication equipment. We u...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of SHM
سال: 1995
ISSN: 1884-1198,0919-4398
DOI: 10.5104/jiep1993.11.9