Large mode area silicon microstructured fiber with robust dual mode guidance
نویسندگان
چکیده
منابع مشابه
Supercontinuum generation in large mode-area microstructured fibers.
Supercontinuum generation in large mode-area microstructured fibers is demonstrated by launching into the fiber ns pulses from a passively Q-switched Nd:YAG laser. The special properties of these fibers open the way to compact, single-mode, high-power supercontinuum sources with a low divergence of the output beam. The nonlinear phenomena leading to the formation of the broad spectrum are also ...
متن کاملTrench-Assisted All-Solid Large-Mode-Area Fiber for Robust Single-Mode Operation
In this talk, we discuss all-solid and easily realizable trench-assisted fibers that show tremendous potential for addressing challenges faced by current fiber designs for power scaling. OCIS codes: (000.0000) General; (000.0000) General [8-pt. type. For codes, see www.opticsinfobase.org/submit/ocis.]
متن کاملSingle-mode tellurite glass holey fiber with extremely large mode area for infrared nonlinear applications.
We report the fabrication of a large mode area tellurite holey fiber from an extruded preform, with a mode area of 3000microm(2). Robust single-mode guidance at 1.55microm was confirmed by both optical measurement and numerical simulation. The propagation loss was measured as 2.9dB/m at 1.55microm. A broad and flat supercontinuum from 0.9 to 2.5microm with 6mW output was obtained with a 9cm len...
متن کاملAsymmetric Very Large Mode Area Fiber with Enhanced Higher Order Mode Delocalization
A novel very-large-mode-area asymmetric rod-type fiber was fabricated and experimentally characterized. The fiber supports effective and robust single-mode operation for a core diameter of 66μm making it attractive for high power amplifier systems. OCIS codes: (060.2280) Fiber design and fabrication, (030.4070) Modes, (060.2320) Fiber optics amplifiers and oscillators.
متن کاملSmall-core single-mode microstructured polymer optical fiber with large external diameter.
A preform sleeving technique is demonstrated that allows the fabrication of single-mode polymer microstructured fiber with the smallest core and hole dimensions yet reported to our knowledge. For a fixed triangular hole pattern a range of fibers is produced by adjustment to the operating conditions of the draw tower. Numerical modeling is carried out for one of the fibers produced with a 570-mi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Optics Express
سال: 2009
ISSN: 1094-4087
DOI: 10.1364/oe.17.018076