Laminar Gas Flow and Flow Rate Distributions in Multiple-Passage-Simulated Fuel Cell.
نویسندگان
چکیده
منابع مشابه
Membraneless vanadium redox fuel cell using laminar flow.
This paper describes the design and characterization of a small, membraneless redox fuel cell. The smallest channel dimensions of the cell were 2 mm x 50 mum or x 200 mum; the cell was fabricated in poly(dimethylsiloxane) using soft lithography. This all-vanadium fuel cell took advantage of laminar flow to obviate the need for a membrane to separate the solutions of oxidizing and reducing compo...
متن کاملAir-Breathing Membraneless Laminar Flow-Based Fuel Cell with Flow- Through Anode
This paper describes a detailed characterization of laminar flow-based fuel cell (LFFC) with air-breathing cathode for performance (fuel utilization and power density). The effect of flow-over and flow-through anode architectures, as well as operating conditions such as different fuel flow rates and concentrations on the performance of LFFCs was investigated. Formic acid with concentrations of ...
متن کاملNumerical simulation of nanofluid flow over diamond-shaped elements in tandem in laminar and turbulent flow
In this paper, the Al2O3-water nanofluid flow in laminar and turbulent flows inside tubes fitted with diamond-shaped turbulators is numerically modeled. The nanofluid flow is modeled by employing a two-phase mixture method and applying the constant heat flux boundary condition at tube walls. In the results, the effects of different parameters such as the geometry of turbulators, volume fraction...
متن کاملModeling and Optimization of non - isothermal two- phase flow in the cathode gas diffusion layer of PEM fuel cell
In this paper, a non-isothermal two-phase flow in the cathode gas diffusion layer (GDL) of PEM fuel cell is modeled. The governing equations including energy, mass and momentum conservation equations are solved by numerical methods. Also, the optimal values of the effective parameters such as the electrodes porosity, gas diffusion layer (GDL) thickness and inlet relative humidity are calculated...
متن کاملLaminar Flow Analysis in the Channel Bends
In this paper the laminar flow in the rectangular channel bends is simulated using numerical techniques. The turning angle of the channel bend and the area ratio of the channel cross-section are two important parameters to be examined. For flow simulation, the body fitted 3-D continuity and momentum equations are used and a body fitted general purpose code is developed. The existing results of ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series B
سال: 1995
ISSN: 0387-5016,1884-8346
DOI: 10.1299/kikaib.61.1606