Laboratory Measurement of Rolling Resistance Coefficient under Different Conditions

نویسندگان

چکیده

The aim of our research was to design and construct a measuring device that can determine the rolling resistance coefficient (RRC) under laboratory conditions. has drum arrangement, RRC measured on two different model surfaces. deceleration method used investigate dependence compression force, velocity, surface temperature steel rubber values (0.010 – 0.025) were similar in magnitude characteristic for asphalt-covered roads. By increasing road up T = 60 ◦C RCC dropped by ~13% compared at 22

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Foil Application to Reduce Resistance of Catamaran under High Speeds and Different Operating Conditions

Today, researchers exploit hybrid craft more than they used to be. The main reason is that they need to high speed as well as extra portability. For instance, a famous hybrid craft is named Hysucat, was designed through the combination of catamaran and hydrofoil. Catamarans, a type of multihull boats, have always considered by designers because of their simultaneous supply of high speed and sta...

متن کامل

Predation in two species of leech under laboratory conditions

Two 60 day experiments on predation behavior of leeches were conducted concurrently. In the first, medicinal leeches, Hirudo orientalis (Utevsky and Trontelj, 2005) were fed to satiation on bovine blood and subsequently transferred into two large opaque plastic containers of equal size but with differing temperatures, 6-7?C and 23-24?C, containing starved Erpobdella octoculata (L.). At the high...

متن کامل

Measurement of Operating Conditions of Rolling Piston Type Rotary Compressors

EISUKE SAKURAI MAJOR APPLIANCE PRODUCTS ENGINEERING LABORATORY TOSHIBA CORPORATION 4-1, UKISHIMA-CHO KAWASAKI-KU, KAWASAKI 210 JAPAN A rolling piston type rotary compressor was modified for measurement of dynamic pressures in the compression and suction chambers, and instantaneous ~ngular position of the shaft. The compressor connected with a compressor load stand was tested at three different ...

متن کامل

Measurement and analysis of the mannitol partition coefficient in sucrose crystallization under simulated industrial conditions.

Mannitol is a major deterioration product of Leuconstoc mesenteroides bacterial metabolism of sucrose and fructose from both sugarcane and sugar beet. The effect of crystallization conditions on the mannitol partition coefficient (K(eff)) between impure sucrose syrup and crystal has been investigated in a batch laboratory crystallizer and a batch pilot plant-scale vacuum pan. Laboratory crystal...

متن کامل

Floor slipperiness measurement: friction coefficient, roughness of floors, and subjective perception under spillage conditions

Measurement of the coefficient of friction (COF) between the shoe/sole and the floor is essential in understanding the risk of slipping accidents. In this research, the COF of five floor materials commonly used on a university campus, under five surface conditions including dry and four liquid spillage conditions, were measured. The COF measurements were conducted using a Brungraber Mark II sli...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Hungarian Journal of Industrial Chemistry

سال: 2023

ISSN: ['2450-5102', '0133-0276']

DOI: https://doi.org/10.33927/hjic-2023-04