KOROSI BAJA TAHAN KARAT AISI 410 DI DALAM LARUTAN BRINE BUATAN
نویسندگان
چکیده
منابع مشابه
Residual Stress Measurement of Laser-Engineered Net Shaping AISI 410 Thin Plates Using Neutron Diffraction
In an attempt to relate the laser-engineered net shaping (LENS) process parameters, laser power and laser travel speed, to the quality of LENS-produced parts, strain measurements were taken at several predetermined points within seven LENS AISI 410 thin plates using the neutron diffraction method. The residual stresses at these points were then calculated using the measured strain values to asc...
متن کاملMechanical Properties of Boronized AISI 316, AISI 1040, AISI 1045 and AISI 4140 Steels
In this study, some mechanical properties of borided and unborided four steels were investigated. Boronizing of steels was performed by powder pack method at 1210 K for 4 h. The hardness of borides, boride layer thickness and room temperature tensile properties were measured and it was observed that hardness and tensile properties strongly depend on chemical composition of steels. In addition, ...
متن کاملCharacterization of 14 Karat Gold Alloys
This paper is a continuation of the project we presented at the 2010 Santa Fe Symposium® in which we defined a characterization system and analysis of data on 18K gold alloys. The research carried out since then has enabled us to connect the physical-mechanical characteristics of each alloy with its chemical composition, thereby identifying the best solution possible to produce a specific item....
متن کاملStabilizing a 22 karat nanogolden cage.
Since the discovery of C(60) fullerene, considerable efforts have been devoted to find other elements with similar hollow cage structures. However, search for hollow metallic cages with a diameter similar to that of C(60) fullerene has been elusive. We describe a procedure for the rational design of metallic cages by suitably choosing their size, composition, and charge state. A 22 karat nanogo...
متن کاملThe Effect of Chloride Ions Concentration on the Electrochemical Behavior of AISI 410 Stainless Steels in Simulated Concrete Pore Solution
The effect of chloride ions concentration on the electrochemical behavior of AISI 410 stainless steel in the simulated concrete pore (0.1 M NaOH + 0.1 M KOH) solution was investigated by various electrochemical methods such as Potentiodynamic polarization, Mott–Schottky analysis and electrochemical impedance spectroscopy (EIS). Potentiodynamic polarization curves revealed that increasing chlori...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Jurnal Teknik Mesin Cakram
سال: 2020
ISSN: 2620-6706
DOI: 10.32493/jtc.v2i2.4024