Kinked Bisamides as Efficient Supramolecular Foam Cell Nucleating Agents for Low-Density Polystyrene Foams with Homogeneous Microcellular Morphology
نویسندگان
چکیده
منابع مشابه
تأثیر نانولوله‌های کربنی بر مورفولوژی سلولی فوم‌های نانوکامپوزیتی میکروسلولار PC/EPDM
This research aimed at producing microcellular foams (with cell size of 1-10 μm and cell density above 10 9 cell/cm3) from PC/EPDM in order to use in medical devices. Due to the weak nucleation behavior of microcellular polycarbonate foams, it is difficult to prepare them. This research provides valuable information regarding the possibility of making microcellular foams from this polymer by u...
متن کاملImpact Strength of High Density Solid-State Microcellular Polycarbonate Foams
The effect of density (relative densities 0.33 to 0.90) on the impact behavior of microcellular polycarbonate (PC) was investigated. Cell size and foaming gas content were also considered. Flexed-beam Izod impact tests were conducted and the impact strength of these foams appears to be a strong function of both density and cell size. The impact strength was observed to improve over the unproces...
متن کاملMicrocellular foams made from gliadin
We have generated closed-cell microcellular foams from gliadin, an abundantly available wheat storage protein. The extraction procedure of gliadin from wheat gluten, which involves only the natural solvents water and ethanol, respectively, is described with emphasis on the precipitation step of gliadin which results in a fine dispersion of mostly spherical, submicron gliadin particles composed ...
متن کاملPhenomenology of bubble nucleation in the solid-state nitrogen–polystyrene microcellular foams
Experimental results on bubble nucleation in the solid-state polystyrene–nitrogen system are presented. It was found that the bubble nucleation occurs over a period of approximately 30 s, and is not instantaneous as previously suggested. Over the range of nitrogen pressures explored, 4–14 MPa, the cell nucleation density increased exponentially. However this increase was many orders of magnitud...
متن کاملEffects of Wood Fiber Content on the Rheological Properties, Crystallization Behavior, and Cell Morphology of Extruded Wood Fiber/hdpe Composites Foams
When increasing the wood fiber (WF) content in extruded wood fiber/plastic composites (WPC) foams, a good balance between reducing the cost and obtaining good cell morphology should be maintained. This study examines the relationship between WF content and the foam morphology in WPC foams. The role of WF as cell nucleating agent at low concentrations (10 wt.%) was observed, as WPC foam with 10 ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Polymers
سال: 2021
ISSN: 2073-4360
DOI: 10.3390/polym13071094