Kinetics of Pyrolysis of Si-Ti-C-O Fibre
نویسندگان
چکیده
منابع مشابه
Photoelectrochemical Water Splitting Properties of Ti-Ni-Si-O Nanostructures on Ti-Ni-Si Alloy
Ti-Ni-Si-O nanostructures were successfully prepared on Ti-1Ni-5Si alloy foils via electrochemical anodization in ethylene glycol/glycerol solutions containing a small amount of water. The Ti-Ni-Si-O nanostructures were characterized by field-emission scanning electron microscopy (FE-SEM), energy dispersive spectroscopy (EDS), X-ray diffraction (XRD), and diffuse reflectance absorption spectra....
متن کاملMultifunctional nanostructured Ti-Si-C thin films
In this Thesis, I have investigated multifunctional nanostructured Ti-Si-C thin films synthesized by magnetron sputtering in the substrate-temperature range from room temperature to 900 °C. The studies cover high-temperature growth of Ti3SiC2 and Ti4SiC3, low-temperature growth of Ti-Si-C nanocomposites, and Ti-Si-C-based multilayers, as well as their electrical, mechanical, and thermal-stabili...
متن کاملTHE Ti / c - Si SOLID STATE REACTION III . The low - temperature reaction kinetics
Thin Ti layers (10 nm) are grown on top of a clean Si(ll1) substrate. Heating these layers initiates a solid state reaction, yielding a monosilicide phase at 350 o C and a C49 disilicide at 450 o C. The present study concerns the growth kinetics of both phases by means of ellipsometry. A diffusion-limited growth kinetics is found for the monosilicide formation. However, two growth rates are obs...
متن کاملKinetics of biomass catalytic pyrolysis.
The Coats-Redfern method was used to analyze the kinetic characteristics of biomass catalytic pyrolysis, indicating that it can be described by multi-step reactions, rather than as a simple first-order reaction. Friedman model-free calculations were used to describe the starting reaction types and the corresponding initial kinetic parameters. Finally, nonlinear regression of biomass catalytic p...
متن کاملSputtring av Ti-Si-C-Ag-beläggningar från sammansatta sputterkällor
Abstract Today gold is used as contact material on electric contacts for low current applications. Gold, however, has low wear resistance, is expensive and environmentally stressful to produce. An alternative contact material to gold is nano composite Ti-Si-C-Ag deposited with DC-magnetron sputtering. Nano composite Ti-Si-C-Ag has so far been deposited by a compound Ti-Si-C sputter target with ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Institute of Metals and Materials
سال: 1991
ISSN: 0021-4876,1880-6880
DOI: 10.2320/jinstmet1952.55.3_294